User's Manual

TEW-753DAP User’s Guide System Conguration

Security : Wireless security was setup to this SSID.

VID : VLAN id for this SSID

Enable : Check this box to enable this SSID

Edit : Click Edit to change the sengs of this

SSID

(Save & Reload is required to take eect.)

AP Detecon

Before you setup your TEW-753DAP wireless sengs, you may

want to know what signal is current running in the air. Click Scan

to make a site survey and list available access points around you.

BSSID : Basic SSID. This is strictly unique SSID to

idenfy a wireless access point, WAP. It

is also the MAC address of the wireless

interface.

SSID : Service Set Idener. This SSID is human

readable and performs as ESSID to setup

wireless groups.

Channel : 2.4GHz wireless channel number

Signal Level : The signal strength from the access point.

Type : The 802.11 wireless mode this access

point provides.

Security : Which wireless security was set to use.

Mode: This wireless source works on

infrastructure mode or ad hoc mode.

Go Back : Click this buon to go back

SSID Sengs

Click Edit one the SSID you want to edit. The following setup

window will appear.

2.4G/5G SSID Prole

SSID Specify the SSID for the current prole.

Suppressed SSID Check this option to hide the SSID from clients. If

checked, the SSID will not appear in the site survey.

Station Separation Click the appropriate radio button to allow or prevent

communication between client devices.

Wireless Security See the Wireless Security section.

Save / Cancel Click Save to accept the changes or Cancel to cancel