User's Manual

TEW-753DAP User’s Guide System Conguration

Fragment Threshold : Packets over the specied size will

be fragmented in order to improve

performance on noisy networks. Specify a

value between 256 and 2346. The default

value is 2346.

RTS Threshold : Packets over the specied size will use

the RTS/CTS mechanism to maintain

performance in noisy networks and

prevenng hidden nodes from degrading

the performance. Specify a value between

0 and 2347. The default value is 2347

Beacon Interval : Beacons are packets sent by a wireless

Access Point to synchronize wireless

devices. Specify a Beacon Interval value

between 24 and 1024. The default value is

set to 100 milliseconds.

DTIM Period : A DTIM is a countdown informing clients

of the next window for listening to

broadcast and mulcast messages. When

the wireless Access Point has buered

broadcast or mulcast messages for

associated clients, it sends the next DTIM

with a DTIM Period value. Wireless clients

detect the beacons and awaken to receive

the broadcast and mulcast messages.

The default value is 1. Valid sengs are

between 1 and 10.

Data rate : You can select a data rate from the drop-

down list, however, it is recommended to

select auto. In auto mode, TEW753DAP

will choose the maximum data rate to

t the instant wireless channel quality

automacally.

N Data Rate : Select dierent 802.11N Modulaon and

Coding Scheme (MCS) against parcular

wireless noise. Or, select auto leng

TEW-753DAP select MCSs dynamically.

Channel Bandwidth : Select channel bandwidth for

1) Dynamic select 20 MHz and 40MHz

bandwidth or 2) choose 20MHz channels

only�

Preamble Type : Select a short or long preamble. For

opmum performance it is recommended

to also congure the client device to the

same preamble type.