User's Manual

TEW-753DAP User’s Guide System Conguration

SNMP Acve : Choose to enable or disable the SNMP

feature

SNMP Version : Select SNMP version from the drop-down

list

SNMP Manager IP : Specify the SNMP manager IP address

Read Community Name : Specify the password for access the SNMP

community for read only access

Set Community Name : Specify the password for access to the

SNMP community with read/write access

System Locaon : Specify the locaon of the TEW-753DAP

System Contact : Specify the contact details of the TEW-

753DAP

Trap Acve : Choose to enable or disable the SNMP

trapping feature

Trap Manager IP : Specify the password for the SNMP trap

community

Trap Community : Specify the name of SNMP trap

community

Apply :

Click this buon to apply the change

Cancel :

Click this buon to abandon the change

SNMP Sengs

SNMP Seng allows you to assign the contact details, locaon,

community name and trap sengs for SNMP. This is a networking

management protocol used to monitor network-aached devices.

SNMP allows messages (called protocol data units) to be sent to various

parts of a network. Upon receiving these messages, SNMP-compable

devices (called agents) return data stored in their Management