TRENDnet User’s Guide Cover Page
TRENDnet User’s Guide Table of Contents Contents Product Overview ...........................................................................2 Package Contents .......................................................................................................... 2 WPS connection using the built in utility (Virtual Push Button) ............................. 10 WPS connection using the hardware push button ................................................. 11 Features ..................................
TEW-809UB TRENDnet User’s Guide Features Product Overview TRENDnet’s AC1900 High Power Dual Band Wireless USB Adapter, model TEW-809UB, upgrades a computer to Wireless AC1900. Quickly connect to a high performance Wireless AC network at 1300 Mbps or to a Wireless N network at 600 Mbps. A high power radio with detachable high gain antennas increase wireless coverage.
TEW-809UB TRENDnet User’s Guide USB 3.0 Micro-B port – Use the included USB 3.0 Micro-B to Type A cable to connect the wireless adapter to your computer. Product Hardware Features Activity LED Indicator –The LED will blink rapidly to indicate WPS has been activated. The LED will blink every 5 sec. when disconnected. When connected, the LED will blink rapidly during wireless data transmission.
TRENDnet User’s Guide TEW-809UB Application Diagram The AC1900 High Power Wireless Dual Band PCIe Adapter can provide wireless AC or wireless N connectivity to a wireless AC/N network (router/access point) through the use of an available USB 3.0 port on your computer. The detachable high gain antenna allows for flexible adjustment to achieve the best possible wireless coverage and connectivity © Copyright 2016 TRENDnet. All Rights Reserved.
TEW-809UB TRENDnet User’s Guide Installing your Wireless Adapter This section describes how to install the software driver for the wireless adapter. 2. At the CD Autorun Prompt window, click Run Autorun.exe. Note: If the Autorun prompt does not appear automatically, open the CD contents and double-click Autorun.exe. At the CD-ROM main menu, click Install Drivers. Windows® OS Installation Supported operating systems: Windows® 10, 8.
TRENDnet User’s Guide 3. At the installation window, click Next. TEW-809UB 4. You will be prompted to accept the end user license agreement. Select I accept the terms of the license agreement and click Next. © Copyright 2016 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide 5. Wait for the driver installation to complete. This may take a few minutes. Note: If you do not receive a security prompt, continue to the next step. If prompted, click Install this driver software anyway. TEW-809UB 8. Using the included USB 3.0 cable, connect the USB 3.0 micro-B side to the adapter and the USB 3.0 type A side to the computer’s USB 3.0 port. 6. After the process is completed, click Finish. © Copyright 2016 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide 9. Attached to the adapter and position the antennas at opposite angles and slightly away from each other on each as shown for optimal coverage. TEW-809UB 10. Click on the wireless icon in the taskbar located in the bottom right corner. © Copyright 2016 TRENDnet. All Rights Reserved.
TEW-809UB TRENDnet User’s Guide 11. Click on the wireless network you would like to connect and click Connect. 12. Enter the WiFi Key (password) and click Next. . 13. The status will display “Connected” to indicate a successful connection. Note: If the connected message does not display, double check your WiFi key (password) and re-enter it. © Copyright 2016 TRENDnet. All Rights Reserved.
TEW-809UB TRENDnet User’s Guide Mac® OS Installation Supported operating systems: Mac® OS 10.6-10.11 3. Open the folder according to the Mac® OS version you are running. For Mac® OS 10.610.11, the folder will be named “Mac OS 10.6-10.11”. For any updates, please check the TRENDnet website www.trendnet.com. 1. Insert the included CD-ROM into your computer’s CD-ROM drive. Note: If you do not have the included CD-ROM, you can download the utility and drivers from http://www.trendnet.com/support/ 4.
TEW-809UB TRENDnet User’s Guide 5. At the Introduction window, click Continue. 6. At the Read Me window, click Continue. © Copyright 2016 TRENDnet. All Rights Reserved.
TEW-809UB TRENDnet User’s Guide 7.At the License Agreement window, click Continue. 9.At the Install window, click Install. 8. When prompted, click Agree. © Copyright 2016 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide 10. When prompted, enter your Mac® user account password to authorize the install, click Install Software. TEW-809UB 12. Once the installation is complete, you will be prompted to restart the computer. Click Restart to restart your computer. 11. When prompted, click Continue Installation. © Copyright 2016 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide 13. Using the included USB 3.0 cable, connect the USB 3.0 micro-B side to the adapter and the USB 3.0 type A side to the computer’s USB 3.0 port. TEW-809UB 14. Attached to the adapter and position the antennas at opposite angles and slightly away from each other on each as shown for optimal coverage. © Copyright 2016 TRENDnet. All Rights Reserved.
TEW-809UB TRENDnet User’s Guide 15. After the driver is successfully installed and wireless adapter is connected, a wireless adapter icon will appear in the top menu bar. Click on the icon in the top menu bar. 12. Enter the WiFi Key (password) and click Join. 16. A list of available wireless network will appear. Click on the wireless network you would like to connect. 13. The wireless adapter icon will change to green WiFi bars to indicate a successful connection.
TEW-809UB TRENDnet User’s Guide Connect to your wireless network using WPS 2. Click the network you would like to connect. Leave this window open. WPS (Wi-Fi Protected Setup) is a feature that makes it easy to connect devices to your wireless network. If your wireless router/access point supports WPS, you can use this feature to easily connect wireless devices to your network.
TEW-809UB TRENDnet User’s Guide WPS connection using the hardware push button 1 On your wireless router/access point, push the WPS button. Note: Typically, the WPS button hold time is 3-5 sec., then release. For TRENDnet routers/access points, the WPS hardware push button hold time is 3 seconds. If you are using another brand device, you may need to refer to your device documentation for WPS operation. 4. The status will display “Connected” to indicate a successful connection.
TRENDnet User’s Guide 3. A series of WPS status messages will appear. Wait for process to complete. TEW-809UB 4. The WiFI status will display “Connected” to indicate a successful connection. Note: If the WPS process fails, you will receive not receive a message “Connected”. You will need to attempt the WPS process again. Please refer to your wireless router/access point documentation regarding the operation of WPS. © Copyright 2016 TRENDnet. All Rights Reserved.
TEW-809UB TRENDnet User’s Guide Mac® OS WPS connection using the built in utility (Virtual Push Button) 5. In the WPS window, click PBC to activate WPS. 1 On your wireless router/access point, push the WPS button. Note: Typically, the WPS button hold time is 3-5 sec., then release. For TRENDnet routers/access points, the WPS hardware push button hold time is 3 seconds. If you are using another brand device, you may need to refer to your device documentation for WPS operation. 6.
TEW-809UB TRENDnet User’s Guide WPS connection using the hardware push button 1 On your wireless router/access point, push the WPS button. 3. The WPS window will appear and a series of status messages will appear. Wait for the WPS process to complete. Note: Typically, the WPS button hold time is 3-5 sec., then release. For TRENDnet routers/access points, the WPS hardware push button hold time is 3 seconds.
TRENDnet User’s Guide TEW-809UB WPS connection using a PIN 5. Log into your router or access point to enter in the wireless adapter PIN and activate WPS. 1. Click on the wireless adapter icon in the top menu bar. Note: You may need to refer to your device documentation for WPS operation and where to enter the client PIN in your router’s configuration page. In TRENDnet routers, typically, the router configuration section to enter the PIN is under Advanced > Wireless 2.4GHz or 5GHz > WPS, example below.
TRENDnet User’s Guide TEW-809UB 7. The WPS window will appear and a series of status messages will appear. Wait for the WPS process to complete. 4. A status message will appear to indicate a successful connection. Note: If the WPS process fails, you will receive not receive a message “Connected”. You may need to attempt the WPS process again. Please refer to your wireless router/access point documentation regarding the operation of WPS. © Copyright 2016 TRENDnet. All Rights Reserved.
Limited Warranty TRENDnet User’s Guide Technical Specifications Frequency Standards IEEE 802.11a IEEE 802.11b IEEE 802.11g IEEE 802.11n (up to 600 Mbps) IEEE 802.11ac (up to 1300 Mbps) Hardware Interface USB 3.0 Micro-B port LED indicator WPS Button 4 x RP-SMA female antenna connectors 4 x High gain detachable dual band antennas 2.4GHz: (FCC) 2.412 – 2.462GHz, (ETSI) 2.412 – 2.472GHz 5GHz: (FCC) 5.150 – 5.250GHz/5.745 - 5.825GHz, (ETSI) 5.150 – 5.250GHz/5.500 – 5.
TRENDnet User’s Guide Limited Warranty Power Consumption: Max. 6.6 W Operating Temperature 0 - 40 C (32 – 104 F) Operating Humidity Max. 80% non-condensing Certifications CE FCC Dimensions 85 x 75 x 20 mm (3.35 x 2.95 x 0.79 in.) Weight 48 g (1.7 oz.) *Disclaimers* * Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications.
TRENDnet User’s Guide Troubleshooting Q: I inserted the Utility & Driver CD-ROM into my computer's CD-ROM Drive and the installation menu does not appear automatically. What should I do? Answer: 1. For Windows® 8.1/8/7, if the installation menu does not appear automatically, click on the Windows Icon on the bottom left hand corner of the screen,, click the “Search programs and files” box, and type D:\Autorun.exe, where “D” in “D:\Autorun.
Limited Warranty TRENDnet User’s Guide Appendix WPA: This encryption is significantly more robust than the WEP technology. Much of the older 802.11a or 802.11g hardware has been upgraded (with How to choose the type of security for your wireless network firmware/driver upgrades) to support this encryption standard. Total wireless Setting up wireless security is very important. Leaving your wireless network open and unsecure could expose your entire network and personal files to outsiders.
Limited Warranty TRENDnet User’s Guide Open or Shared \ WEP – Enter the WEP key for your wireless network. Wireless network has WEP security enabled, open or shared. Please note that the Key Index 1-4 must also match the same index configured on the wireless router/access point. WEP Key Format HEX ASCII Character set 0-9 & A-F, a-f only Alphanumeric (a,b,C,?,*, /,1,2, etc.
Limited Warranty TRENDnet User’s Guide d. Then click Obtain an IP address automatically and click OK. Windows® XP a. Go into the Control Panel, double-click the Network Connections icon b. Right-click the Local Area Connection icon and the click Properties. c. Click Internet Protocol (TCP/IP) and click Properties. d. Then click Obtain an IP address automatically and click OK. Note: If you are experiencing difficulties, please contact your computer or operating system manufacturer for assistance.
Limited Warranty TRENDnet User’s Guide Federal Communication Commission Interference Statement RoHS 15.21 This product is RoHS compliant. You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
Limited Warranty TRENDnet User’s Guide Česky [Czech] TRENDnet tímto prohlašuje, že tento TEW-809UB je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 2006/95/ES, 2014/35/EU, 2004/108/ES, 2014/30/EU, 2011/65/EU, a REACH (ES) 1907/2006. Dansk [Danish] Undertegnede TRENDnet erklærer herved, at følgende udstyr TEW-809UB overholder de væsentlige krav og øvrige relevante krav i direktiv 2006/95/EF, 2014/35/EU, 2004/108/EF, 2014/30/EU, 2011/65/EU, og REACH (EF) 1907/2006.
TRENDnet User’s Guide Limited Warranty 2014/35/EU, 2004/108/ES, 2014/30/EU, 2011/65/EU, in REACH (ES) 1907/2006. Slovensky [Slovak] Suomi [Finnish] Svenska [Swedish] TRENDnettýmtovyhlasuje, že TEW-809UBspĺňazákladnépožiadavky a všetkypríslušnéustanoveniaSmernice 2006/95/ES, 2004/108/ES, 2014/35/EU, 2014/30/EU, 2011/65/EU, a REACH (ES) 1907/2006.
TRENDnet User’s Guide Limited Warranty Industry Canada Statement This Class B digital apparatus complies with Canadian ICES-003 Cet appareil numérique de classe B est conforme à la norme NMB-003. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Limited Warranty TRENDnet User’s Guide Limited Warranty TRENDnet warrants only to the original purchaser of this product from a TRENDnet In the event that, after evaluation, TRENDnet cannot replace the defective product or there is no comparable model available, we will refund the depreciated value of the product. authorized reseller or distributor that this product will be free from defects in material and workmanship under normal use and service.
Limited Warranty TRENDnet User’s Guide shipping from outside of the USA and Canada are responsible for any return shipping CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, and/or customs charges, including but not limited to, duty, tax, and other fees.
TRENDnet User’s Guide Limited Warranty
