User's Manual

Table Of Contents

TRENDnet User’s Guide

TEW-821DAP

• Extension Channel: When you choose manual channel selecon and 20/40MHz

or 40MHz in channel width, you can choose which neighbour channel you want to

combine, upper channel or lower channel, or auto to let the device to decide.

• Channel (Frequency): If you want to setup xed channel, choose a channel

number to switch your radio frequency. Otherwise, check auto to select the

channel automacally which is selected by default. (When you choose 20/40MHZ

or 40MHz channel HT mode, the channel selecon list is shorter. Four marginal

channels are reserved for channel expansion.)

• AP Detecon: Before you setup your TEW-821DAP wireless sengs, you may want

to know what signal are currently broadcasng. Click Scan to do a site survey and

list the running access points around you.

• Current Prole: General setups opons for your 2.4GHz / 5GHz wireless

connecon. You can setup up to eight SSIDs for dierent groups of users. Do any

of the following:

 Click the Enable checkbox to enable the wireless prole.

 Click Edit to modify the sengs and aer modicaons are done, click Apply.

 Wireless Sengs:

 SSID: Select the human readable SSID to be easily idened. You can choose

any combinaon with 1 to 32 leers.

 Hide SSID: Select this checkbox to hide the SSID in the outgoing beacon frame

so a staon cannot obtain the SSID through scanning using a site survey tool.

 Separate Staons: If you enable staon separaon, wireless clients (a.k.a.

STAs) associated with this SSID cannot communicate to each other directly

even if they are in the same wireless group.

 Wireless Security:

 Security Mode: Choose between WEP-OPEN, WEP-SHARED, WEP-AUTO, WPA-

Personal, WPA2-Personal, WPA2-Personal Mixed, WPA-Enterprise, WPA2-

Enterprise Mixed. Please see more in “Wireless Networking and Security” on

page 17.