Datasheet

TFC-110S15i/30i/60i

Intelligent 10/100Base-TX to 100Base-FX

Fiber Converter

TEW-503PI (07-28-2005)

TFC-110S15i/30i/60i

rev:01.30.2007

FEATURES

TFC-110Sxxs series Fiber Converter transforms 10/100Base-TX

UTP/STP media to 100Base-FX media and vice versa. The

10/100Base-TX port auto-sense 10 or 100Mbps connection speeds,

auto-negotiates half-/full-duplex mode, and auto-MDIX media type.

This converter gives your switch the ability to interface with fiber

connection over a distance up to 60 Km.

• Compliant with IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX, 100Base-FX Standards

Provides Dip switch to set: Fiber (FDX/HDX), UTP (Auto Negotiation/Manual), Speed (10M/100M), LLR (Enable/Disable), LLCF

(Enable/Disable)

Support LLCF (Link Loss Carry Forward, Link Pass Through)

Support LLR (link Loss Return) for FX port

Monitor the status of duplex/link for FC, duplex / speed / link for TX via management module (TFC-1600MM) through Media

Converter Chassis System (TFC-1600)

Hot Pluggable & Wall-Mountable

Optional 19” System Chassis (TFC-1600) holds up to 16 Media Converters

5-Year Warranty

•

PAGE 1
Intelligent 10/100Base-TX to 100Base-FX Fiber Converter TFC-110S15i/30i/60i TFC-110Sxxs series Fiber Converter transforms 10/100Base-TX UTP/STP media to 100Base-FX media and vice versa. The 10/100Base-TX port auto-sense 10 or 100Mbps connection speeds, auto-negotiates half-/full-duplex mode, and auto-MDIX media type. This converter gives your switch the ability to interface with fiber connection over a distance up to 60 Km. FEATURES • Compliant with IEEE 802.3 10Base-T and IEEE 802.
PAGE 2
Intelligent 10/100Base-TX to 100Base-FX Fiber Converter TFC-110S15i/30i/60i SPECIFICATIONS Hardware Standard • IEEE 802.3 10Base-T • IEEE 802.3u 100Base-TX, 100Base-FX • 10Base-T: UTP Cat. 3, 4, 5, EIA/TIA-568 100-ohm STP Network Media • 100Base-TX: UTP Cat.