User Guide

© Copyright 2016 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TFC-1600MM
13
Reboot
COMMANDS
reboot
Factory Reset
COMMANDS
reset
cpureset
reset: for all modules factory reset.
cpureset: only this control module factory reset.
Image Update
COMMANDS
update <ipaddr> <path_filename (64)>
The <ipaddr> is to set the TFTP Server IP Address first and <path_filename (64)> is the Image File name as you store in the TFTP Server.
General Configuration
COMMANDS
config system passwd
config system name <string 31>
config system location <string 31>
config system refreshtime {never | 10secs | 30secs | 1min | 5mins}
show system
The “refreshtime” is to set the refreshing time of the device through the web.
IP interface configuration
COMMANDS
config ipif system ipaddress <ip_addr> <ip_mask> [<ip_addr>]
show ipif
<ip_addr>: to allocate an IP address for the device, the default IP is “192.168.1.1”.
<ip_mask> : to set the Subnet Mask, the default is “255.255.255.0”.
[<ip_addr>]: to set the gateway address.