User Guide

© Copyright 2016 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TFC-1600MM
16
CPU module information
COMMANDS
show mediaconverter chassis
Media Converter Configuration
COMMANDS
show mediaconverter status
config mediaconverter slot <integer (1-16)> ([name <string (7)>] [Device_LLCF {v|x}] [Device_Enable {v|x}] [M1_LLR {v|x}] [M1_Auto {A|F}] [M1_Speed
{10M|100M|1G}] [M1_Dup {F|H}] [M1_FC {v|x}] [M1_Enable {v|x}] [M2_LLR {v|x}] [M2_Auto {A|F}] [M2_Dup {F|H}] [M2_Enable {v|x}])
Media Converter Configuration command (Some of the function can be control only depends on the Smart Media Converter Modules):
{v|x}, V stands for “yes” and X stands for “No”.
{A|F}, “A” for Auto-Negotiation or “F” for “forced Mode”.
{10M|100M|1G}, to select the speed of the copper port, “10M”, “100M” or “1G”
{F|H}, “F” for Full Duplex or “H” for Half Duplex