1. Before You Start Package Contents THESE/ THEBES »Quick Installation Guide ~Removable terminal block +DIN-Rail mount «Wall mount kit Minimum Requirements « Existing network »Power Supply (TI-M6024) 2.
3. Hardware Installation ‘The switch can be placed on a desktop, wall, or mounted to a DIN-All. Din-Rall Mounting Instructions 1. Attach the DIN-tall mount bracket to the switch. 2. Population the unit In front of the DIN-All and hook the mount bracket over the top of the tall. 3. Rotate the flier converter downward towards the tall to lock it Into claps. You will know fits secure when you hear the click. N s 4.
Wall Mounting Instructions 1. Attach the wall mount plates to switch. 2, Mount the switch. «Tum off the power before connecting any modules or wire. The correct prows supply voltage (12 56V DC} is listed on the product label. Check the voltage of your power source to make sure that you are using the correct part. Do NOT use voltage greater than 12 56V DC, the product label. » Calculate the maximum possible current in each power wire and common wire.
Applying Poorer 1. Connect the power supply (sold separately} to the included terminal block (as shown below) and secures with the screws. Note: Polarities must match. 2. Attach the terminal block to the ult, connect the neutral wires to the ground, and supply power o the power adapter. THOTH TI-BED Connect a network source and devices tn the switch. Check the LESS to confirm the connections are established. Your installation is completed.
Declaration of Conformity TREND NET Manufacturer’s Name snd Address ‘Trend net, Inc. 20675 Manhattan Place Torrance, CA 90501 USA sequestration 156 2587 WB ‘The Hague The Netherlands Product Information Mode Number: Product Name: 5-Port Industrial Fast Ethernet DIN-All Switch 8-Port Industrial Fast Ethernet DIN-Rail Switch Trade Nam Trend net Trendier hereby declare that the product i in compliance with the essential requirements and either relevant provisions under our eels responsibility.
