Quick Installation Guide TI-F11SFP
1. Before You Start Package Contents ŸTI-F11SFP ŸQuick Installation Guide ŸRemovable terminal block ŸDIN-rail mount ŸWall mount plates Minimum Requirements ŸExisting network ŸPower supply (TI-M6024) 2.
. Hardware Installation ŸThe TI-F11SFP can be placed on a desktop, wall, or mounted to a DIN-rail. DIN-rail Mounting Instructions 1. Attach the DIN-rail mount bracket to the media converter. 2. Position the unit in front of the DIN-rail and hook the mount over the top of the rail. 3. Rotate the media converter downward towards the rail to lock it into place. You will know it is secure when you hear the click. Mounting the unit Releasing the unit 4.
Wall Mounting Instructions 1. Attach the wall mount plates to the media converter. 2. Mount the unit. Safety Note ! ŸTurn off the power before connecting any module or wire. The correct power supply voltage (12 - 56 V DC or 18 - 36 V AC) is listed on the product label. Check the voltage of your power source to make sure that you are using the correct part. Do NOT use voltage greater than 12 - 56 V DC or 18 - 36 V AC, as specified on the product label.
Applying Power 1. Connect the power supply (sold separately) to the included terminal block (as shown below) and secure the screws. Note: Polarities must match. 2. Attach the terminal block to the unit, connect the neutral wire to the ground, and supply power to the power adapter. 3. Connect your Ethernet cable, install an SFP module, and connect a fiber cable to the media converter. Check the LEDs to confirm the connections are established. Your installation is completed.
4. Additional information 1. DIP Switch ON 1 OFF 2 3 4 Speed ON: 100M OFF: 1000M SFP ON: Off OFF: Auto ON: Con.
Manufacturer’s Name and Address TRENDnet, Inc. 20675 Manhattan Place Torrance, CA 90501 USA Product Information: Model Number: TI-F11SFP Product Name: Hardened Industrial 100/1000 Base-T to SFP Media Converter TRENDnet Trade Name: TRENDnet hereby declare that the product is in compliance with the essential requirements and other relevant provisions under our sole responsibility.
TI-F11SFP Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service. Specific warranty periods are listed on each of the respective product pages on the TRENDnet website. Garantie Limitée TRENDnet garantit ses produits contre les problèmes de matériel ou de fabrication, dans des conditions normales d'utilisation et de service. Les périodes de garanties précises sont mentionnées sur chacun des pages produits du site web de TRENDnet.
TI-F11SFP Обмежена гарантія TRENDnet надає гарантію на свою продукцію щодо відсутності дефектів матеріалів та роботи за умови її належного використання та обслуговування. Конкретні гарантійні періоди перелічені на сторінці кожного виробу на сайті компанії TRENDnet. Certifications This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received.
