1. Before You Start Package Contents *TI-G230 Quick Installation Guide *Removable terminal block *DIN-tall mount + Wall mount kit Minimum Requirements = Existing network «Power Supply (T-524048 / TI-512048) 2.
3. Hardware Installation ‘The Poe-++ injector can be placed on a desktop, wall, or mourned to a DIN-Rail. DIN-tall Mounting Instructions 1. Attach the DIN-Rail mount to the Poe injector. 2. Position the unit In front of the DIN-All and hook the mount bracket over the top of the rail. 3. Rotate the injector downward towards the rail to lock it iro place. You will know it is secure ‘when you hear the click. HA Mounting the unit 3 xs Releasing the unit 4.
Wall Mounting Instructions 1. Attach the wall mount plates to Poe injector. 2. Mount the Injector. «Tum off the power before connecting any module or wits. The correct power supply voltage (48 56V DC) is listed on the product label, Check the voltage of your power source to make sure that you are using the correct part. Do NOT use voltage greater than 48 56V DC, the product label. (TI-1G290 power supply voltages 52-56V DC) * Calculate the maximum possible comment in each power wire and common wire.
Appalling Power 1. Connect the power supply (sold separately) to the included terminal block (2s shown below) and secure with the screws. Mote: Polarities must match. 2. Attach the terminal block to the unk, connect the neutral wire to the ground, and supply power to the power adapter. SS [IEE 3. Connect a network source and devices tn the Injector. Hack the LED to conform the connections are established. Your installation is completed.
Declaration of Conformity TREND NET Manufacturer's Name and Address ‘Trend net, Inc. 20675 Manhattan Place Romance, CA 90501 USA Sequestrate 156 2567 WB ‘The Hague The Netherlands Product Information: Model Number: THG290 Product Name: 95W 2-Port Industrial 2.56 Po's-+ Injector Trade Name: Trend net Trend net hereby declare that the product ls in compliance with the essential requirements and other relevant provisions under our sole responsibility.
Declaration of Conformity TREND NET Manufacturer's Nam and Address ‘Trend net, Inc. 20675 Manhattan Place Torrance, CAS0501 USA Autocrat presort: CA Office: +44 (0) 1635 887 399 Unit 4 River mead Business Park, Pliers Way, Thatch am, REORG 4EP England Product Information: Model Number: THG290 Product Name: 95W 2-Port Industrial 2.
