3. Hardware Installation ‘The Poet injector can be placed on a desktop, wall, or mounted to 2 DIN-Rail. Din-rall Mounting Instructions 1. Attach the DIN-Riel mount to the Poet injector. 2. Position the unit In front of the DIN-All and hook the mount bracket aver the top of the tall. 3. Rotates the fiber converter downward towards the tall to lock It Into place. You wll know It Is secure when you hear the slick. o s Mounting the unit Reloading the unit 4.
Wall Mounting Instructions 1. Attach the wall mount plates to Poet injector. 2, Mount the switch. «Turk off the power before connecting any mauled or wire. The corm est power supply voltage (48 56V DC) Is listed on the product labs. Check the voltages of your powder source to make sure that you are using the correct part. Do NOT use voltage greater than the product label. » Calculate the maximum possible current in each power wire and comment wire.
Appalling Over 1. Connect the power supply (sold separately} to the included terminal block (as shown below) and secure with the screws. Note: Polarities must match. 2. Almach the terminal block to the unit, connect the neutral wits to the ground, and supply prows o the power adapter. 3. Connect a network source and devices to the switch. Check the LED to confirm the connections are established. Your Installation Is completed.
Declaration of Conformity TREND NET Manufacturer’s Name snd Address ‘Trend net, Inc. 20675 Manhattan Place Torrance, CA90501 USA sequestrate 156 2587 WB The Hague The Netherlands.