Datasheet

Table Of Contents

6-Port Industrial Gigabit PoE+ Wall-Mounted Front

Access Switch

TI-PG62F (v1.0R)

• 4 x Gigabit PoE+ ports

• 2 x Gigabit SFP slots

• 120W PoE power budget

• 12Gbps switching capacity

• Forwarding rate: 8.9Mpps (64-byte packet size)

• Supports jumbo frames up to 10KB

• Hardened IP30 rated metal housing

• Includes DIN-Rail bracket and magnetic wall mount kit

• Operating temperature range of -40° – 75° C (-40° – 167° F)

• Redundant power inputs with overload current protection

• Alarm relay triggered by power failure

• Power supply sold separately (models: TI-S12048, TI-S24048, and 48VDC3000)

• Lifetime Warranty

TRENDnet's Industrial Gigabit PoE+ Wall-Mounted Front Access Switch Series is well suited for IP surveillance, IoT, and automation

networks for homes and businesses. These hardened industrial gigabit ﬂat switches provide front access to ports and power

interfaces for easier installation. The ﬂat and compact size make them ideal for cabinet installations where space is limited. Each

hardened industrial front access switch features gigabit PoE+ ports for connecting devices, such as wireless access points, IP

TI-PG62F

cameras, and IoT appliances. These hardened front access switches come equipped with an IP30 rated metal enclosure, designed

to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° – 75° C (-40° – 167° F)

for industrial environments.

PAGE 1
TI-PG62F 6-Port Industrial Gigabit PoE+ Wall-Mounted Front Access Switch TI-PG62F (v1.0R) • 4 x Gigabit PoE+ ports • 2 x Gigabit SFP slots • 120W PoE power budget • 12Gbps switching capacity • Forwarding rate: 8.
PAGE 2
TI-PG62F Wall-Mounted Front Access Switch The wall mountable ﬂat switch provides front access to ports and power interfaces for easier installation. It's ﬂat and compact size make it ideal for cabinet installations where space is limited. NETWORKING SOLUTION PoE+ Power Hardened Industrial Design A 120W PoE power budget supplies PoE power from the hardened industrial front access switch to up to eight Power over Ethernet devices.
PAGE 3
TI-PG62F FEATURES Network Ports PoE Power Hardware Design 4 x Gigabit PoE+ ports, and 2 x Gigabit SFP Slots Supplies up to 30W of PoE+ power per port with a 120W power budget Wall mountable hardware design provides front access to ports and power interfaces for easier installation Compact The ﬂat and compact size is ideal for cabinet installations where space is limited Mounting Hardware Includes DIN-Rail bracket and magnetic wall mount kit Switching Capacity Dual power inputs provide redundant po
PAGE 4
TI-PG62F Terminal Block • Redundant power inputs, alarm relay contact, 6-pin • Wire range: 0.34mm^2 to 2.5mm^2 • Solid wire (AWG): 12-24/14-22 • Stranded wire (AWG): 12-24/14-22 • Torque: 5 lb. – In / 0.5Nm / 0.