Owner's manual

- 18 -
3. Click
Configure
…. Select “
RVS Port (COM#)
”. Click
OK
.
4. Click
Next
. Enter the ISDN phone number of your ISP. Click
Next
.
5. Click “
Finish
”. Now you are ready for Internet access through CAPI.
Making Multilink PPP Connections
There are two ways to setup the ISDN PC Card for Multilink PPP (MP or
MLP) connections through CAPI mode.
Method 1
1. Execute
RVSCommCenter
.
2. Complete the PPP connection setup in the previous section.
3. Execute
Config.
(Start->Programs->Configuration Utility).
4. Open the
General
tab. Click “
MP Enabled
” in “
PPP Setting
”. Apply the
other settings, “
BOD Enabled
” and “
Second Phone No
.” if available.
5. Now you are ready for Internet access.