Owner's manual

- 23 -
Maximum speed=4800 V.110 user rate = 4800 bps.
Maximum speed=9600 V.110 user rate = 9600 bps.
Maximum speed=19200 V.110 user rate = 19200 bps.
Maximum speed=38400 V.110 user rate = 38400 bps.
Maximum speed=57600 V.110 user rate = 57600 bps*
* Available only for Japan
If the maximum speed you selected is not in the above list, the
system will automatically adapt the V.110 user rate to the
default setting at 38400 bps.
7. Enter the ISDN phone number of the remote party that you want to call.
8. Click “
Next
”, and click “
Finish
” to complete the setting.
Making V.120 Connections
1. Execute “
CommCenter
”. And make sure all the settings are well and
correctly configured.
2. Double-click “
Make New Connection
”.
3. Name the new connection appropriately. For example, “V.120”.
4. Select “
RVS ISDN V.120
” in the “
Select a device
” box.
5. Click “
Configure
” button, and give the appropriate settings. Ignore the
“
Maximum speed
” setting (you are recommended to set to the speed at
higher than 64000 bps, such as 115200 or higher). Click “
Next
”.
6. Click “
Next
”.
7. Enter the ISDN phone number of the remote party that you want to call.
8. Click “
Next
”, and click “
Finish
” to complete the setting.
Making X.75 Connections
1. Execute “
CommCenter
”. And make sure all the settings in the tab are
well and correctly configured.
2. Enter “
Control Panel
” Æ “
Modems
”. Select “
RVS ISDN X.75
transparent
”. Click “
Proprieties
” button. Make sure the COM port
setting is correctly assigned.