Owner's manual

- 24 -
3. Run Windows 95 “
Hypertrm
”. Name the new connection appropriately.
For example, “
RVS_X75
”. Click “
OK”
.
4. Enter the ISDN phone number that you want to connect to.
5. Select “
RVS ISDN X.75 transparent
” in “
Connect using”
box. Click
“
OK
”.
6. Click “
Dial
” button to make dialing.
After establish the ISDN link, you can use the data transmission protocol, such
as Z-modem or X-modem, for data transfer.
For servers which support X.75 T.70NL protocol, you have to choose “
RVS
ISDN X.75 T.70NL
” in the above setup steps.
EuroFile Transfer Applications
1. Start RVS
CommCenter
. If your are to act as an answering party (host
mode), check
Accept calls
, otherwise disselect this box to act as the
calling party. Check
Eurofile transfer
.
2. Start the RVS
TransferMaster
. The
New Connection
dialog appears.