Owner's manual

- 38 -
5. If you are using disks to install the device driver, insert the disk into your
free floppy drive and type in the drive name, for example,
A
:, to continue.
Or if you are using compact disk to install, insert the compact disk into
your computer and type in the CD-ROM drive letter followed by
winnt\driver
, and click
OK
to continue.
6. When
the Select OEM Option
dialog box appear, click
OK
to continue.
7. The following dialog box will prompt you to change the I/O and IRQ
settings. You may refer to the Hardware Detection to know the available
addresses to avoid any conflicts with your system. (Go to the
Start
menu.
Click
Programs
. Select
Configuration Utili
ty. Open
Hardware
Detection
.)