Owner's manual

- 44 -
CAPI Mode
Installing RVS-COM Lite
Make sure the RVS-COM Lite “
CommCenter
” has been executed before start
any application in CAPI mode. For details, refer to the previous section with
the same title in the Windows 95/98 environment.
Applications
All the applications applied in Windows NT can be executed as in Windows
95/98. For better illustrations, refer to the previous sections with the same
titles.
Making PPP connections
1. Run RVS-COM “
CommCenter
”.
2. Enter “
Control Panel
” Æ “
Modems
”. Click “
Add
” button.
3. Select “
Don't detect my modem; I will select it from a list
”. Click
“
Next
”.
4. Select “
RVS Datentechnik
” – “
RVS ISDN Internet PPP
”. Click
“
Next
”.
5. Select the COM port that is identical to the COM port assignment in
“
Windows Port
”. Click “
Next
”.
6. Click “
Finish
”.
7. Now you will see “
RVS ISDN Internet PPP
” in the modem properties
list.
8. Click “
Close
”.
9. Click “
Yes
”, when “
Modem Setup
” window pops-up.
10. Click “
Add
” in “
Remote Access Setup
” dialog window.
11. Select “
COM# RVS ISDN Internet PPP
” in RAS device list. Click
“
OK
”.
12. Click “
Continue
”. Then, re-start Windows NT.
13. Run RVS-COM “
CommCenter
”.
14. Double click “
Dial-Up Networking
” in “
My Computer
”.