Owner's manual

- 45 -
15. If you are not new of using Dial-up Networking, click “
New
” command
button. If this is your first connection, just skip it. Give a name for the
new connection. For example, “
RVS_PPP
”. Click “
Next
”.
16. Select “
Send my plain text password…
” (recommended). Click “
Next
”.
17. Select
“RVS ISDN Internet PPP (COM#)
”. Click “
Next
”.
18. Give the phone number that you want to dial to. Click “
Next
”.
19. Click “
Finish
”.
20. Click “
Dial
” to make connection immediately. Or click “
Close
” to wait
for later PPP applications.
Making Multilink PPP connections
1. Perform the above steps in the previous section to complete the PPP
connection.
2. Run RVS-COM “
CommCenter
”. If only one COM port is assigned, you
have to add another ISDN port.
3. Click the “
Add
” command button. Select “
An ISDN channel on your
local PC
”. Click “
Next
”. Assign a free COM port for the second ISDN
port. Click “
Next
”. Click “
Finish
”.
4. Make sure the second ISDN port “
ISDN2
” is activated (the check box is
selected). Click “
OK
”.
5. Enter “
Control Panel
” Æ “
Modems
”. Click “
Add
” button.
6. Select “
Don’t detect my modem; I will select it from a list
”. Click
“
Next
”.
7. Select “
RVS Datentechnik
” – “
RVS ISDN Internet PPP
”. Click
“
Next
”.
8. Select the COM port that you just assigned at step (2). Click “
Next
”.
9. Click “
Finish
”.
10. Now you will see “
RVS ISDN Internet PPP #2
” in the modem
properties listed in “
Control Panel
” Æ “
Modems
”. Click “
Close
”.
11. Click “
Yes
”, when “
Modem Setup
” window appears.
12. Click “
Add
” in “
Remote Access Setup
” dialog box.