Owner's manual

- 47 -
5. Open “
Switch type
”. Choose appropriate “
Voice Encoding
” scheme. The
setting should be consistent with RVS-COM in step (3).
Now you are ready to use the RVS-COM’s Softmodem function. Refer to the
RVS-COM on-line documentation for application details.
Making G3 Fax over ISDN
1. Start
CommCenter
.
2. Open the
SoftwareFax
tab. Select “
Use SoftwareFax to receive fax
” to
receive a fax. Or select “
Use SoftwareFax to send fax
” to send a fax.
3. Open “ISDN” tab. Select appropriate ISDN voice encoding scheme for
your location. Generally, you should select “
A-law
” for European
countries, “
Mu-law
” for North America
4. Open the
Service
tab. Select
Accept calls
. Select
Fax
. Click OK.
Sending a fax
1. Start
Create New Fax
in the RVS-COM group programs. Click
OK
.
2. Follow the on-screen instruction to enter the necessary information.
When all set, RVS will send out the fax for you automatically.
Receiving a fax
3. Wait for incoming fax calls.
4. You can go to
Inbox
to read the incoming fax.