Quick Installation Guide TK-802R TK-1602R
Table ofofContents Table Contents English ..................................................................................................... 1. Before You Start ................................................................................ 2. How to Install ..................................................................................... 3. Operation ........................................................................................... 1 1 2 5 Troubleshooting ................................
1.
2. How to Install 1. Turn OFF all computers and their peripherals, and then disconnect all power cords. 2. Use the KVM cables to connect each computer to the KVM switch. Note: Do not use the supplied daisy-chain cable to connect to your computer. You must purchase these KVM cables separately. 3. Connect the shared PS/2 keyboard, monitor, and PS/2 mouse to the KVM switch's Console Port. (TK-1602R shown) 4. Connect the included AC Power Adapter to the KVM switch and then to a power outlet. 5.
Daisy-Chain Note: 1. Must use the daisy chain cable provided with the KVM switch 2. Only daisy chain the KVM switch with another TK-802R or TK-1602R. 3. Stackable up to 16 KVM switches 6. Connect one end of the daisychain to the Daisy chain in port on the first (master) KVM switch. 7. Connect the opposite end of the daisy-chain cable to the Console port on the second (slave) switch. 8. If you have a third KVM switch, connect one end of the daisy chain to the Daisy chain in port on the second KVM switch.
Note: DO NOT PRESS the port 1 button for 3 seconds or longer on any slave switch because this will initialize only the switches downstream from this slave switch. 10. Turn ON the connected computers one-by-one and wait until each computer's desktop appears. Rack Mount The KVM Switch can be mounted in an EIA standard-size, 19-inch rack, which can be placed in a wiring closet with other equipment.
3. Operation Note: To switch between computers, you can use the front-panel push buttons or the Hot Key commands. LED Indicators Bank Number: Indicates the number or sequence of the switch when daisy chained. This number is 01 when the switch is not daisy chained. Red LED light: KVM cable is connected and PC is powering the KVM switch. Green LED light: Indicates the selected PC port is active, whether the computer is turned on or off. Push Buttons Press the push buttons to switch between computers.
Hot-Key Commands A keyboard hot-key command consists of at least three keystrokes: Hot-Key command = ScrLk + ScrLk + Command key(s) After pressing the ScrLk key, you have 2 seconds to press the ScrLk key again. You then have another 2 seconds to press a command key. A beep confirms that the KVM switch is in "Hot-Key" mode. If you do not press a key within 2 seconds, the switch will exit hot-key mode.
7 English A Change PC Name ScrLk Find PC by Name --- F R + ScrLk + ScrLk Reflash EEPROM + ScrLk + B + ScrLk + ScrLk Autoscan Beep Sound On/Off + ScrLk + PgDn + ScrLk + PgUp ScrLk ScrLk Next higher bank Next lower bank + ScrLk + (Arrow down) + ScrLk Y Next higher channel + (Arrow up) B + ScrLk + + ScrLk (ab) = bank number (yz)= 2-digit channel number ScrLk + ScrLk + Hot-Keys Next lower channel Select PC Command Z --- Use arrow keys to select and then hit enter -----
8 English End Press any button or key Press any button or key Press any key on keyboard Stop Autoscan End Autoscan activity Specify a delay within a range of 5~99 seconds Autoscan through every connected channel for quick browsing of each channel Press any push button --- --- S Activates OSD menu --- --- Press on button 1 for 3 seconds Resets/reboot/initialize daisy-chain and activates password protection Description --- Front-panel Use arrow keys to navigate, then hit enter to select
On Screen Display (OSD) Control To activate the OSD Menu, use the following hot-key command: ScrLk + ScrLk + Space Bar Note: For detailed information about the operation of the OSD, please refer the User's Guide.
Troubleshooting Q1: Do I need to use the included external AC adapter? A1: It is recommended that you use the included external AC adapter with the TK-802R/TK-1602R KVM switch. Q2: Can I connect or disconnect the KVM cables while the computers are turned on? A2: Yes, you can connect or disconnect the KVM cables while the computers are turned on, because the interface is Hot-Pluggable.
Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase.
WARRANTIES EXCLUSIVE: IF THE TRENDnet PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, THE CUSTOMER'S SOLE REMEDY SHALL BE, AT TRENDnet'S OPTION, REPAIR OR REPLACEMENT. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation. Waste electrical and electronic products must not be disposed of with household waste. Please recycle where facilities exist. Check with you Local Authority or Retailer for recycling advice.
TRENDnet Technical Support US . Canada Toll Free Telephone: 1(866) 845-3673 24/7 Tech Support Europe (Germany . France . Italy . Spain . Switzerland . UK) Toll Free Telephone: +00800 60 76 76 67 English/Espanol - 24/7 Francais/Deutsch - 11am-8pm, Monday - Friday MET Worldwide Telephone: +(31) (0) 20 504 05 35 English/Espanol - 24/7 Francais/Deutsch - 11am-8pm, Monday - Friday MET Product Warranty Registration Please take a moment to register your product online. Go to TRENDnet’s website at http://www.
