User's Guide
Table Of Contents
- TK-RP08
- The TK-RP08 allows its user to upgrade firmware contents whenever is needed to enhance its functionality and/or performance. With the firmware upgrade feature, your investment on the unit is further ensured and its life-time value just maximized. You don’t have to buy a newer unit just to have better features, instead you can have them all added to your current unit with an easy flash upgrade! The correct Flash upgrade procedure is described below. Please follow the instructions to complete your firmware upgrade.
- The TK-RP08 can be used as a power control accessory for TK-IP101 Swtich, or any other KVM Switch that supports a standard serial power control.
- Before you connect the TK-RP08 to the TK-IP101, you might need to install them first into their own proper placements within a rack, that is , if you are going to use them within a rack. After you have installed the TK-RP08, TK-IP101 into the rack, or into their proper locations, you can now proceed with following steps for further connections.
iii
Table of Contents
Table of Contents ................................................................................................................................. iii
Quick Installation ................................................................................................................................. 1
Flash Upgrade Operation Guide (Using Windows HyperTerminal) .................................................. 7
Serial Command Set ........................................................................................................................... 10