Installation guide

3
10. Insert the Utility CD-ROM into your
computer's CD-ROM drive.
12. Follow the NAS Setup wizard instructions
and click Finish.
11. Click Install NAS setup.
8. Press the power button.
9. Verify that the status LED indicators on the
front of the TN-200 to confirm that the device
is fully functional: Power (Green), HDD1
[Hard Drive 1] (Green) and/or HDD2 [Hard
Drive 2] (Green)
13. Double click on the NAS Setup icon.
14. Select the NAS and click Connect.
15. Enter the user name and password and
then click OK. By default:
User name: admin
Password: admin
16. Click OK.