User Guide

TRENDnet User’s Guide

PoE Web Smart Switch Series

Statistics

Statistics provide important information for troubleshooting switch problems at the port

level. The Web Management Utility provides a two statistics charts, including Traffic

Information and Error Information.

Traffic

System > Statistics > Traffic

1. Log into your switch management page (see “Access your switch management page”

on page 5).

2. Click on System, click on Statistics, and click on Traffic.

3. View the Traffic Information Statistics.

• InOctets: Inbound Octets (Bytes/s), number of inbound octet bits in bytes per

second.

• InUcastPkts: Inbound Unicast Packets (Pkts), number of inbound unicast packets

in packets per second.

• InNUcastPkts: Inbound Non-unicast Packets (Pkts), number of inbound non-

unicast packets (such as broadcast and multicast packets) in packets per second.

• InDiscards: Inbound Discards (Pkts), number of inbound discarded packets in

packets per second.

• OutOctets: Outbound Octets (Bytes/s), rate of outbound octet bits in bytes per

second.

• OutUcastPkts: Outbound Unicast Packets (Pkts), number of outbound unicast

packets in packets per second.

• OutNUcastPkts: Outbound Non-unicast Packets (Pkts), number of outbound

non-unicast (such as broadcast and multicast packets) packets.

• OutDiscards: Outbound Discards (Pkts), number of outbound discarded packets.

• Apply: Click the Apply button to clear port specific Traffic information.

• Refresh: Click the Refresh button to update table with newest traffic

information.

4. At the bottom of the left hand panel, click Save.

5. Select the Config you would like to save the settings to, then click Save Settings to

Flash.

Note: This step saves all configuration changes to the NV-RAM to ensure that if the

switch is rebooted or power cycled, the configuration changes will still be applied.