Manualshelf

User Guide

ManualsBrandsTRENDnet ManualsComputers & Accessories10-Port Gigabit Web Smart PoE+ Switch with 8 Gigabit PoE+ Ports, 2 SFP Slots, 130W PoE Budget, VLAN, QoS, LACP, IPv4/IPv6 Static Routing, Black
12345678910
© Copyright 2018 TRENDnet. All Rights Reserved.
ii
TRENDnet User’s Guide
PoE Web Smart Switch Series
Diagnostic LEDs
• Power LED
On
:
When the Power LED is on, the device is receiving power.
Off
:
When the Power LED is off, the power adapter is not
connected or the device is not receiving power.
• PoE MAX (Power over Ethernet Max.)
On
:
When reaching near the max PoE power budget provided
75W or above, the LED will turn on and the system will not
provide power additional PD (PoE client devices) after max
PoE budget is reached.
Off
:
When the PoE power provided is below the 75W PoE
power budget.
• Gigabit Ethernet PoE+ Port LEDs (1-8)
• Link/Activity button Mode
Green
on
When the Green LED is on, the respective port is
connected to a 1Gbps Ethernet network.
Amber
on
When the Green LED lights on, the respective port is
connected to a 10/100Mbps Ethernet network.
Green
Blinking
When the LED is blinking green, the port is transmitting or
receiving data on the network at 1Gbps speed.
Amber
Blinking
When the LED is blinking amber, the port is transmitting
or receiving data on the network at 10/100Mbps speed.
Off
When the LED is off, the respective port is disconnected.
• Gigabit Ethernet Port PoE+ LEDs (1-8)
• PoE LED button Mode
Green
on
When the Green LED is on, the connected device is
receiving power.
Amber
on
When the Amber LED lights on, the connected PoE device
is not receiving power. The cause is either insufficient
power budget, or due to Class/PowerLimit restrictions in
the PoE configurations.
Off
When the LED is off, the respective port is either not
connected to a PoE device or is disconnected.
• SFP Slots (9-10)
• Link/Activity
Green on
:
When the SFP LED is on, the link established using
the SFP module is operating at 1Gbps speed.
Green blinking
:
When the SFP LED is blinking, the port is
transmitting or receiving data on through the
1Gbps link established.
Amber on
When the SFP LED is on, the link established using
the SFP module is operating at 100Mbps speed.
Amber blinking
When the SFP LED is blinking, the port is
transmitting or receiving data on through the
100Mbps link established.
Off
No link established.