Datasheet

TPE-115GI
rev: 12.26.2012
Gigabit PoE+ Injector
TPE-115GI (v1.0R)
The Gigabit PoE+ Injector, model TPE-115GI, combines electrical
power with a Gigabit network connection to produce a Gigabit Power
over Ethernet Plus (PoE+) signal. Connect this device to a non-PoE
Gigabit switch and then run an Ethernet cable for up to 100 meters
(328 ft.) to network PoE+ or PoE devices. The integrated power supply
reduces installation clutter.
Auto sensing technology delivers 30 Watts to 802.3at PoE+ devices or
15 Watts to 802.3af PoE devices. No need to buy a PoE switch—use
an existing open port from a non-PoE switch to save installation and
equipment costs when installing TRENDnet PoE access points and IP
cameras in remote locations.
FEATURES
• IEEE 802.3at PoE+ (30 Watt) compliant
• Backwards compatible with IEEE 802.3af PoE (15 Watt) devices
• Automatically supplies a PoE+ (30 Watts) or PoE (15 Watts) connection to the device
• Integrated power supply
• Network devices for distances of up to 100 meters (328 ft.)
• 1 x 10/100/1000 Mbps Auto-MDIX Data In port
• 1 x 10/100/1000 Mbps PoE+ Auto-MDIX Data Out port
• Power port with LED indicator
• Easily install a PoE+ or POE device where a power outlet is not available
• Reduce installation and network equipment costs
• Safeguards network devices with short circuit protection
• 3-year limited warranty
PRODUCT OVERVIEW
• Full Duplex Gigabit speeds
• Converts a non-PoE Gigabit port to a PoE+ or PoE Gigabit port
• Integrated power supply
• Network distances of up to 100 meters (328 feet)
• Save on installation and equipment costs