User's Guide

TRENDnet User’s Guide

PoE Web Smart Switch Series

Switch View

View your switch status information

Dashboard > Switch View

1. Log into your switch management page (see “Access your switch management page”

on page 5).

2. Click on Dashboard, then click on Switch View. The switch view shows the ports that

are connected.

3. Review the settings below.

• Port: Designates the port number that is displayed.

• Throughput: Current throughput being used for the specified port

• Loopback Detection: Displays the loopback detection status

• Distance: Displays the estimated length of the cable measured in meters

• PoE On/Off: Enable and disable PoE power on the specified port with the

toggle switch

• PoE Standard: Displays the PoE standard of the PD device

• Power Consumption: Displays the current power consumption of the PD device

in Watts.

Real-time Statistics

View your switch status information

Dashboard > Real-time Statistics

1. Log into your switch management page (see “Access your switch management page”

on page 5).

2. Click on Dashboard, then click on Real-time Statistics. The switch view shows the

ports that are connected. Select Status, Duplex, Speed, or PoE to display which ports

are currently using the selected feature.

3. Select the port from the drop down menu to review the current settings.

• Total(Rx): The total number of packets received

• Total(TX): The total number of packets transmitted

• UC (Rx): The number of Unicast packets received

• MC(Rx): The number of Multicast packets received

• BC(Rx): The number of Broadcast packets received

• UC(Tx): The number of Unicast packets transmitted

• MC(Tx): The number of Multicast packets transmitted

• BC(Tx): The number of Broadcast packets transmitted