User's Guide

© Copyright 2020 TRENDnet. All Rights Reserved.
61
TRENDnet User’s Guide
PoE Web Smart Switch Series
4. At the bottom of the left hand panel, click Save.
5. Select the Config you would like to save the settings to, then click Save Settings to
Flash.
Note: This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.
Multicast VLAN Access Settings
Network > Multicast VLAN > Associate Group Setup
1. Log into your switch management page (see “Access your switch management page”
on page 5).
2. Click on Network, click on Multicast VLAN, and click on Multicast VLAN Access
Settings.
3. Review the settings. Click Add to save the settings.
• VLAN ID – Enter the VLAN ID you would like to assign.
• Profile Name – Enter the name for this profile.
4. At the bottom of the left hand panel, click Save.
5. Select the Config you would like to save the settings to, then click Save Settings to
Flash.
Note: This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.