User's Guide

© Copyright 2020 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TPE-3012LS / TPE-3018LS
19
Time
Time
This section will allow users to configure time and date settings.
Clock Settings
1. Log into your switch management page (see “Access your switch management page”
on page 11).
2. Click on Time and click on Clock Settings.
3. The date and time and can be manually entered and configured in the options
provided.
4. After completing your configuration changes, click Apply.
5. Click Save in the top left menu to save configuration to NV-RAM.
SNTP Settings
1. Log into your switch management page (see “Access your switch management page”
on page 11).
2. Click on Time and click on SNTP SEttings.
3. Review the settings below.
Item
Description
Source
Select the time source.
• SNTP: Time sync from NTP server.
• From Computer: Time set from browser host.
• Manual Time: Time set by manually configure.
Time Zone
Select a time zone difference from listing district.
SNTP
Address Type
Select the address type of NTP server. This is enabled when
time source is SNTP.
Server
Address
Input IPv4 address or hostname for NTP server. This is
enabled when time source is SNTP.
Server Port
Input NTP port for NTP server. Default is 123. This is
enabled when time source is SNTP.
Manual Time
Date
Input manual date. This is enabled when time source is
manual.
Time
Input manual time. This is enabled when time source is
manual.
Daylight Saving Time