Ÿ16-Port Gigabit PoE+ Switch TPE-TG160g ŸQuick Installation Guide (1) TPE-TG160 (V1) /02.05.
1. Before You Start Package Contents ŸTPE-TG160g ŸQuick Installation Guide ŸPower cord ŸRack mount kit Minimum Requirements ŸComputer with network adapter installed ŸRJ-45 Network cable Optional Equipment ŸEIA standard 19” rack 2. LEDs LED Color Sequence Definition PWR Green Solid Device is on Off Device is off Solid The total PoE output power has reached maximum capacity, do not connect any more PoE devices to the unit.
. Hardware Installation Note: The maximum amount of power available is 30 Watts per port and 246 Watts total. If a power overload has occurred, the Switch will prioritize the distribution of power by port (from lowest to highest). That is, port 1 will receive the highest priority and port 4 will receive the lowest priority. The ports with lower priority will have their PoE function disabled until sufficient power becomes available. 1. Plug the power cord into the power adapter.
Manufacturer’s Name and Address TRENDnet, Inc. 20675 Manhattan Place Torrance, CA 90501 USA Product Information: Model Number: TPE-TG160g 16-Port Gigabit PoE+ Switch Product Name: TRENDnet Trade Name: TRENDnet hereby declare that the product is in compliance with the essential requirements and other relevant provisions under our sole responsibility.
TPE-TG160g Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following length of time from the date of purchase. Warranty: 3 year limited warranty (When Applicable: 1 year warranty for power adapter, power supply, and cooling fan components.) Visit TRENDnet.com to review the full warranty policy, rights, and restrictions for this product.
