Ÿ8-Port Gigabit PoE+ Switch TPE-TG80g Ÿ Quick Installation Guide (1) TPE-TG80g (V3) /01.23.
1. Before You Start Package Contents ŸTPE-TG80g ŸMulti-Language Quick Installation Guide ŸPower cord ŸPower adapter (54V DC, 2.77 A) Minimum Requirements ŸComputer with network adapter installed ŸRJ-45 network cable Ÿ The surface must support at least 430g for the Switch. Ÿ The power outlet should be within 1.82 meters (6 feet) of the switch ŸMake sure that there is proper heat dissipation from and adequate ventilation around the switch Ÿ Do not place heavy objects on the switch 2.
. Installation du matériel Note: The maximum amount of power available is 30 Watts per port and 123 Watts total. If a power overload has occurred, the Switch will prioritize the distribution of power by port (from lowest to highest). That is, port 1 will receive the highest priority and port 8 will receive the lowest priority. The ports with lower priority will have its PoE function disabled until more than 7.5 watts of power becomes available. 1. Plug the power cord into the Power Adapter.
Manufacturer’s Name and Address TRENDnet, Inc. 20675 Manhattan Place Torrance, CA 90501 USA Product Information: Model Number: TPE-TG80g 8-Port Gigabit GREENnet PoE+ Switch Product Name: TRENDnet Trade Name: TRENDnet hereby declare that the product is in compliance with the essential requirements and other relevant provisions under our sole responsibility.
TPE-TG80g Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following length of time from the date of purchase. Warranty: 3 year limited warranty (When Applicable: 1 year warranty for power adapter, power supply, and cooling fan components.) Visit TRENDnet.com to review the full warranty policy, rights, and restrictions for this product.
