3-Port 200Mbps Powerline AV Adapter (TPL-305E) Wireless Router Storage Internet Media Server Game Console Y X B A 10/100Mbps Powerline
Outlet Outlet
Outlet
Troubleshooting 1. I have verified that my Powerline device is connected to my workstation, but I cannot detect other Powerline devices. What should I do? 1. Verify that you are using Cat. 5, Cat 5e or Cat. 6 Ethernet network cables from each TPL-305E adapter. 2. Verify that the power outlet of the TPL-305E is plugged into is on the same electrical power distribution and/or circuit breaker box. 3.
Windows Vista 1. Go into the Control Panel, click Network and Internet, click Network and Sharing Center, click Manage Network Connections and then right-click the Local Area Connection icon and then click Properties. 2. Click Internet Protocol Version 4(TCP/IPv4) and then click Properties. Then click on Obtain an IP address automatically. Windows XP/2000 1. Go into the Control Panel, double-click the Network Connections icon and then right-click the Local Area Connection icon and then click Properties.
Description of Modes Erp (EuP) Operation: Standby Mode The EUT has no external mechanical switch and uses an internal program to control active and standby modes. Disconnect the Ethernet cables from the device Ethernet ports, and after 3 minutes, the device will enter standby mode. The Power (PWR) LED will flash every 15 seconds to indicate that the device is currently in standby mode.
Copyright ©2011. All Rights Reserved. TRENDnet.
