User's Guide

  

©Copyright2016TRENDnet.AllRightsReserved.  


TRENDnetUser’sGuide

TPL‐406E/TPL‐406E2K
16
5.EntertheDevicePassword(DPW)andclickOK.
Note:MatchtheDevicePassword(DPW)tothecorrespondingMACaddress.


6.Ifsuccessful,youwillreceiveamessageindicatingthatthepasswordiscorrect.
ClickOK.



Repeatsteps2‐6foreachadditionalPowerlineadapterli stedinRemote
Deviceuntil
youhaveaddedallofyourremainingPowerlineadaptersbeforecontinuingtothe
nextstep“Tocreateacustomizedencryptionkey”.
Tocreateacustomizedencryptionkey

1.InthePowerlineUtilityPrivacywindow,underPrivateNetworkNam e,enterthenew
encryptionkeyforyourPowerlinenetwork.


2.AfteryouhaveenteredyournewPowerlineencryptionkey,clickSetRemote
Devices.


3.ClickOK.Ifsuccessful,youwillreceiveamessageindicatingthatallPowerline
adapterswereaddedtoyournetworkverifyingthattheencryptionkeywaschangedfor
allPowerlineadapters.ClickOK.

