Operation Manual

Internet
Note: It is recommended to plug the adapters into nearby outlets before installing the devices to the desired locations.
2. Sync Button Procedure
1
2
3
Push Sync button
for 3 seconds, then
release. PL LED will
blink.
(On Adapters A & B)
PL LED will turn
solid when
connected.
1
2
(On Adapter A or B) Push Sync
button for 3 seconds. Then
release. PL LED will blink.
3
(On All Adapters) PL LED will
turn solid when connected.
Push Sync button for 3
seconds, then release.
PL (Powerline) LED
will blink.
Connect Additional Adapters using the Sync button
3
4
(On Adapter C) Push Sync
button for 3 seconds, then
release. PL LED will blink.
A
B C