TRENDnet User’s Guide Cover Page
TRENDnet User’s Guide Contents Product Overview ...........................................................................1 Package Contents .......................................................................................................... 1 Features ......................................................................................................................... 1 Product Hardware Features...........................................................................................
TPL-430AP / TPL-430APK TRENDnet User’s Guide Features Product Overview WiFi Everywhere™ Powerline 1200 AV2 Access Point (TPL-430AP) TRENDnet’s WiFi Everywhere™ Powerline 1200 AV2 Access Point, model TPL-430AP, uses an electrical outlet to create or expand a wireless network. Two Powerline adapters are needed to start a network. Connect one Powerline adapter to the router, and plug the TPL-430AP into a power outlet in another room where WiFi connectivity is needed.
TRENDnet User’s Guide Compatibility Backward compatible with Powerline 600, 500, and 200 adapters MIMO with Beamforming Technology Enhanced performance and range Multiple Adapters Use up to 8 adapters on a single Powerline network Easy Installation TRENDnet adapters auto-connect out of the box TPL-430AP / TPL-430APK Use your router’s WPS button and the TPL-430AP’s WiFi Clone button to conveniently copy your existing wireless network name and password for quick network integration.
TPL-430AP / TPL-430APK TRENDnet User’s Guide Product Hardware Features TPL-430AP Hardware Button Action Function Initiate Sync/Connection and generate random network name/key (PL LED will start blinking). Power Prongs Sync Sync Push then release Note: The secondary or additional Powerline adapter’s Sync button must also be pushed within 2 minutes (120 sec) of pushing the Sync button on the first adapter in order to establish connectivity.
TPL-430AP / TPL-430APK TRENDnet User’s Guide LED Power 2.
TPL-430AP / TPL-430APK TRENDnet User’s Guide • Diagnostic LEDs – Indicates the device status and connectivity. Note: The following factors may affect the Powerline network’s connection quality: • Noise – Generated by appliances which use your electrical system (e.g. Microwaves, ovens, blow dryer, iron, dishwasher, etc.). The quality of your household electrical wiring may also cause additional noise on your electrical system.
TRENDnet User’s Guide TPL-430AP / TPL-430APK Basic Installation Note: It is recommended to plug the adapters into nearby outlets before installing the devices to the desired locations. Note: If you are connecting the adapters to a third-party powerline device other than TRENDnet and encounter issues, please refer to the manufacturer’s documentation for the appropriate sync button procedure.
TRENDnet User’s Guide TPL-430AP / TPL-430APK 5. Once you have successfully connected the powerline adapters through the electrical system, you can move the TPL-430AP to the desired location to create or extend wireless connectivity to your existing network. 6. For added security the TPL-430AP has been pre-configured with a unique wireless network name (SSID) and wireless key which can be found on the Preset Wireless Settings sticker or device label.
TRENDnet User’s Guide Configure your Powerline Access Point Access your access point management page Note: Your access point management page default IP address http://192.168.10.1 (when the computer is connected directly to TPL-430AP’s LAN port) is accessed through the use of your Internet web browser (e.g. Internet Explorer®, Firefox®, Chrome™, Safari®, Opera™) and will be referenced frequently in this User’s Guide. TPL-430AP / TPL-430APK 3.
TPL-430AP / TPL-430APK TRENDnet User’s Guide Note: Checking the Use the same SSID and security settings for both 2.4 GHz and 5 GHz bands box, will change the SSID, Wireless security mode, and wireless password on the 5 GHz band to match the exact same settings inputted on the 2.4 GHz band. Setting up your TPL-430AP Setup > Wireless 1. Log into your access point management page 4. 5. 2. 3. Go to Setup and click on Wireless TPL-430AP has pre-configured wireless settings.
TRENDnet User’s Guide TPL-430AP / TPL-430APK Connect wireless devices to your powerline access point A variety of wireless network devices can connect to your wireless network such as: • Gaming Consoles • Internet enabled TVs • Network media players • Smart Phones • Wireless Laptop computers • Wireless IP cameras Each device may have its own software utility for searching and connecting to available wireless networks, therefore, you must refer to the User’s Manual/Guide of your wireless client
TPL-430AP / TPL-430APK TRENDnet User’s Guide Connect wireless devices using WiFi Clone / WPS PBC (Software/Virtual Push Button) Advanced > WPS WiFi Clone is a feature that makes it easy to setup your TPL-430AP to connect to your network. This feature allows your TPL-430AP to copy your router’s existing settings (ex: Wireless SSID, Wireless Password etc.) to your TPL-430AP. If your router supports WPS, you can use WiFi Clone to easily connect your TPL-430AP to your router.
TPL-430AP / TPL-430APK TRENDnet User’s Guide Setup Security Standard WPA IEEE 802.11b/g (802.11n devices will operate at 802.11g to connect using this standard) IEEE 802.
TRENDnet User’s Guide Steps to improve wireless connection There are a number of factors that can impact the range of wireless devices. Follow these tips to help improve your wireless connectivity: 1. Keep the number of obstructions to a minimum. Each obstruction can reduce the range of a wireless device. Position the wireless devices in a manner that will minimize the amount of obstructions between them. a. b. c. d. e. 2. 3. 4.
TPL-430AP / TPL-430APK TRENDnet User’s Guide Advanced Wireless Advanced > Wireless Settings Advanced These settings are advanced options that can be configured to change advanced wireless broadcast specifications. It is recommended that these settings remain set to their default values unless you are knowledgeable about the effects of changing these values. Changing these settings incorrectly can degrade performance.
TPL-430AP / TPL-430APK TRENDnet User’s Guide • Band Width: Select the channel width for the access point to operate on. By default, the access point is on 40 MHz. • Wireless Channels: In North America, this access point can broadcast on 1 of 11 Channels for 2.4 GHz (13 in Europe and other countries). Selecting the Auto option enables the access point to automatically select the best Channel for wireless communication.
TPL-430AP / TPL-430APK TRENDnet User’s Guide System Restore System > Restore Device Management System > Change Password You may want to restart or restore your powerline access point if you are encountering difficulties with your access point and have attempted all other troubleshooting. This section provides instructions on configuring the login credentials to the TPL-430AP’s Interface. 1. Log in to TPL-430AP. Note: It is highly recommended that you configure the login password. 3.
TPL-430AP / TPL-430APK TRENDnet User’s Guide Firmware Update System > Firmware update 1. 2. 3. 4. TRENDnet may periodically release firmware upgrades that may add features or fix problems associated with your TRENDnet access point model and version. To check if there is a firmware upgrade available for your device, please check your TRENDnet model and version using the link. http://www.trendnet.com/downloads/ 5. Log into your TPL-430AP’s management page.
TPL-430AP / TPL-430APK TRENDnet User’s Guide Status Clients System > Information System > Clients You may want to check the system information of your access point such as IP address settings, access point mode, wireless and wired network settings, access point wireless MAC addresses, and firmware version. You may want to check to see what devices are currently connected to your TPL-430AP. This page will show the number of clients that are connected, their IP address and the clients’ MAC address. 1.
TRENDnet User’s Guide Installing your Powerline Adapters Before you Install TPL-430AP / TPL-430APK Connect a Powerline adapter to your router 1. Plug the Powerline adapter into an available wall power outlet near your router. Note: This will allow devices connected to your Powerline network to access the Internet and other devices connected to your network. 1. Before you proceed with the installation, verify the following: • You already have a router already installed.
TRENDnet User’s Guide TPL-430AP / TPL-430APK Add adapters to your network Once you have installed and connected the first Powerline adapter to your router, you can easily extend your network to other rooms by adding additional Powerline adapters. To extend your network using an additional Powerline adapter: 1. First, make sure the first Powerline adapter is installed and connected to your router.
TRENDnet User’s Guide TPL-430AP / TPL-430APK Securing your Powerline Network Powerline networks consist of two or more Powerline devices connected together using the same encryption key. TRENDnet Powerline adapters automatically connect to each other over a secure encrypted signal and share the same encryption key (Default encryption key: HomePlugAV).
TRENDnet User’s Guide Troubleshooting Q: I typed http://TPL-430AP in my Internet Browser Address Bar, but an error message says “The page cannot be displayed.” How can I access the access point management page? Answer: Assign your computer a static IP address in the subnet of 192.168.10.x (ex. 192.168.10.25) and access the access point using the default IP address 192.168.10.1. http://192.168.10.1 Q: I typed http://192.168.10.
TPL-430AP / TPL-430APK TRENDnet User’s Guide Please reference the items below if you continue to experience difficulty with installing • and using your Powerline adapters. • Do not plug the Powerline adapters into a power strip. Make sure to plug the adapters directly into a power outlet and not through power strip. Using adapters through a power strip may negatively affect Powerline connectivity and performance.
TPL-430AP / TPL-430APK TRENDnet User’s Guide Technical Specifications Networking Distance • TPL-430AP Powerline: Up to 300m (984 ft.) linear distance over electrical power lines*** Standards Encryption • IEEE 802.3 • Wireless: WPA2-PSK • IEEE 802.3u • Powerline: 128-bit AES (Advanced Encryption Standard) • IEEE 802.3x • IEEE 802.3ab • IEEE 802.11a • IEEE 802.11b • IEEE 802.11g • IEEE 802.11n (up to 300Mbps) • Auto-connects to other TRENDnet Powerline adapters • IEEE 802.
TPL-430AP / TPL-430APK TRENDnet User’s Guide Operating Temperature • 0° – 40° C (32° – 104° F) Operating Humidity • Max. 90% non-condensing Data PHY Rate • Networking Distance • Certifications • FCC • IC Dimensions • 255 x 130 x 75mm (10.04 x 5.11 x 2.95in.) 332g (11.7 oz.) Warranty • Powerline: Up to 300m (984 ft.) linear distance over electrical power lines*** Encryption • Powerline: 128-bit AES (Advanced Encryption Standard) Powerline Nodes • Up to 8 (max.
TRENDnet User’s Guide TPL-430AP / TPL-430APK Warranty • 3 year Package contents • TPL-430AP • TPL-423E • Quick Installation Guide • 2 x Network cable (1.5m / 5 ft.) © Copyright 2017 TRENDnet. All Rights Reserved.
TPL-430AP / TPL-430APK TRENDnet User’s Guide Appendix Note: If you are experiencing difficulties, please contact your computer or operating system manufacturer for assistance.
TPL-430AP / TPL-430APK TRENDnet User’s Guide In MAC 10.4, from the Configure IPv4, drop-down list, select Using DHCP and click the Apply Now button. In MAC 10.5, from the Configure drop-down list, select Using DHCP and click the Apply button. In MAC 10.6, from the Configure drop-down list, select Using DHCP and click the Apply button. f. Restart your computer. d. Then click Use the following IP address, and assign your network adapter a static IP address. Click OK MAC OS® 10.4/10.5/10.6 a.
TPL-430AP / TPL-430APK TRENDnet User’s Guide How to connect to a wireless network using the built-in Windows utility? Note: Please note that although the following procedures provided to follow for your operating system on configuring your network settings can be used as general guidelines, however, it is strongly recommended that you consult your computer or operating system manufacturer directly for assistance on the proper procedure for connecting to a wireless network using the built-in utility.
TPL-430AP / TPL-430APK TRENDnet User’s Guide Federal Communication Commission Interference Statement Europe – EU Declaration of Conformity This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
TPL-430AP / TPL-430APK TRENDnet User’s Guide Česky [Czech] TRENDnet tímto prohlašuje, že tento TPL-406E je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 2004/108/ES. Malti [Maltese] Hawnhekk, TRENDnet, jiddikjara li dan TPL-406E jikkonforma malħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fidDirrettiva 2004/108/EC.
TPL-430AP / TPL-430APK TRENDnet User’s Guide Industry Canada Statement This device complies with Industry Canada license-exempt RSS standard(s).Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB3(B).
Limited Warranty TRENDnet User’s Guide Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase. WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. TRENDNET NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION MAINTENANCE OR USE OF TRENDNET’S PRODUCTS.