Quick Installation Guide TK-209K TK-409K
Table ofofContents Table Contents English ...................................................................................................... 1. Before You Start ................................................................................. 2. How to Connect ................................................................................. 3. Operation .......................................................................................... 1 1 2 4 Troubleshooting ...................................
1.
2. How to Connect Note: The TK-209/TK-409 USB KVM Switch does not require any drivers or software. 1. Turn off both computers and their peripherals, and disconnect all power cords. 2. Connect the shared keyboard, monitor, mouse, microphone (optional) and speaker (optional) to the KVM Switch's console port. 3. Use the provided KVM and audio cables to connect your PC to your KVM switch. KVM Cable Audio Cable TK-209 TK-409 PC 4. Turn ON the first computer and wait until startup completes.
. Press the face panel button on the KVM Switch to select the second computer (Optional). 6. Turn ON the second computer and wait until startup completes. PC 2 (TK-209) PC2, PC 3, PC4 (TK-409) Your installation is now complete.
3. Operation Note: For PC switching, you can use the face-panel buttons of the KVM Switch, a Hot-Key Command sequence via keyboard, or the Client Switch Software (Windows only). For more detail on the Client Switch Software, please consult the Client Switch Software manual on the User's Guide CD-ROM. Face-Panel Buttons Press the corresponding face-panel button to select your PC. Hot-Key Command Sequence After pressing the ScrLk key, you have 2 seconds to press the ScrLk key again.
Troubleshooting Q1: Where is the power supply? I did not find one in the box. A1: The TK-209/TK-409 does not require a power supply. It draws power from your computer's USB connection. As long as your KVM switch is connected to the USB port, it will receive the necessary power to function. Q2: I have the KVM switch connected properly, but my keyboard and mouse don't work. A2: First, make sure your USB port is working properly by testing it with your other USB devices.
Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase.
WARRANTIES EXCLUSIVE: IF THE TRENDnet PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, THE CUSTOMER'S SOLE REMEDY SHALL BE, AT TRENDnet'S OPTION, REPAIR OR REPLACEMENT. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation. Waste electrical and electronic products must not be disposed of with household waste. Please recycle where facilities exist. Check with you Local Authority or Retailer for recycling advice.
TRENDnet Technical Support US . Canada Toll Free Telephone: 1(866) 845-3673 24/7 Tech Support Europe (Germany . France . Italy . Spain . Switzerland UK) Toll Free Telephone: +00800 60 76 76 67 English/Espanol - 24/7 Francais/Deutsch - 11am-8pm, Monday - Friday MET Worldwide Telephone: +(31) (0) 20 504 05 35 English/Espanol - 24/7 Francais/Deutsch - 11am-8pm, Monday - Friday MET Product Warranty Registration Please take a moment to register your product online. Go to TRENDnet’s website at http://www.
