Quick Installation Guide TEW-638APB H/W: V1
Table ofofContents Table Contents English ...................................................................................................... 1 1. Before You Start ................................................................................ 1 2. Hardware Installation .......................................................................... 2 Troubleshooting ........................................................................................ 8 Version 01.31.
1. Before You Start Package Contents TEW-638APB ? User's Guide CD-ROM ? Multi-Language Quick Installation ? Guide AC Power Adapter (12V DC, 1A) ? 1 RJ-45 cable ? Installation Requirements Web Browser: Internet Explorer (6 or higher) ? ? A computer with a network adapter or wireless adapter properly installed.
2. Hardware Installation Note: 1: Locate an optimum location for the Access Point. The best place for the Access Point is usually at the center of your wireless network. 2: Disable any anti-virus and firewall programs before starting hardware installation. For Windows Users 1. Insert Driver CD-ROM. 2. Click Run Setup.exe (Windows Vista only) 3. Click Setup Wizard. 4. Click I accept the terms in the License Agreement and then click Next.
. Connect the provided RJ-45 cable from a LAN port on your Router to the LAN port on the TEW-638APB. Then click Next. 6. Connect a RJ-45 cable from a LAN port on your Router to the Ethernet port on your computer. 7. Connect the AC Power Adapter to the Access Point and then to a power outlet and then click Next. 8. Select the TEW-638APB from the list and then click Configure.
9. Enter a password and then click Login. The default password is admin. 10. Select Access Point and then click Next. Note: For AP Client setup, please refer to the User's Guide for step by step instructions. The User's Guide can be found on this product's CD-ROM. 11. Select Dynamic IP Address Configuration and then click Configure. 12. Select Manual setup and then click Next.
13. Enter a SSID and then click Next. By default, the SSID is TRENDnet638. 14. Select the desired Wireless Mode and then click Next. 15. Select a Security Mode and then click Next (example shows WPA-PSK). 16. Select the desired WPA mode, enter characters for your PreShared key, keep Cipher Type as TKIP and AES and then click Next. For WPA-PSK or WPA2PSK, the Pre-Shared Key must be between 8 and 63 ASCII or 64 HEX characters. Make sure to copy down the Pre-Shared Key.
17. Click Save (optional). 18. Give the file a name, then click Save (optional). 19. Click Confirm to apply the settings. 20. Click Exit.
21. Click Yes to exit. Note: To connect a wireless computer to the TEW-638APB, refer to Question 1 in the Troubleshooting section. Your configuration is now complete. For detailed information regarding the TEW-638APB's configuration and advanced settings, please refer to the Troubleshooting section, User's Guide CD-ROM, or TRENDnet's website at http://www.trendnet.com.
Troubleshooting Q1: All the settings are correct, but I can not make a wireless connection to the Access Point. A1: First, double check that the wireless LED on the Access Point is lit. Second, power cycle the Access Point. Unplug the power to the Access Point. Wait 15 seconds, then plug the power back in. Third, contact the manufacturer of your wireless network adapter. Make sure the wireless network adapter is configured with the proper SSID. The default SSID of the Access Point is TRENDnet638.
GPL/LGPL General Information This TRENDnet product includes free software written by third party developers. These codes are subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). These codes are distributed WITHOUT WARRANTY and are subject to the copyrights of the developers. TRENDnet does not provide technical support for these codes. The details of the GNU GPL and LGPL are included in the product CD-ROM. Please also go to (http://www.gnu.org/licenses/gpl.
GPL/LGPL informações Gerais Este produto TRENDnet inclui software gratuito desenvolvido por terceiros. Estes códigos estão sujeitos ao GPL (GNU General Public License) ou ao LGPL (GNU Lesser General Public License). Estes códigos são distribuídos SEM GARANTIA e estão sujeitos aos direitos autorais dos desenvolvedores. TRENDnet não presta suporte técnico a estes códigos. Os detalhes do GNU GPL e do LGPL estão no CD-ROM do produto. Favor acessar http://www.gnu.org/licenses/gpl.txt ou http://www.gnu.
Product Warranty Registration Please take a moment to register your product online. Go to TRENDnet’s website at http://www.trendnet.com/register 20675 Manhattan Place Torrance, CA 90501 USA Copyright ©2009. All Rights Reserved. TRENDnet.
