Quick Installation Guide TU3-H4 1.
Table of Contents English 1. Before You Start 2. Install Hardware 3. Verify Installation 1 1 2 3 Technical Specifications Troubleshooting 4 5 Version 04.29.
1. Before You Start Package Contents ŸTU3-H4 ŸMulti-Language Quick Installation Guide ŸUSB 3.0 Type A to Type B Cable (1.8m/6ft) ŸPower Adapter (5V DC, 2.5A) System Requirements ŸUSB Port: USB 3.0, 2.0 or 1.1 ŸUSB 3.0 Cable Supported Operating Systems CPU Memory Windows 7 (32/64-bit) 1GHz or above 1GB RAM or above Windows Vista (32/64-bit) 800MHz or above 512MB RAM or above Windows XP (32/64-bit) 300MHz or above 256MB RAM or above Note: USB 3.
2. Install Hardware Note: 1. To take advantage of SuperSpeed USB 3.0, your computer's USB port and your USB devices must support SuperSpeed USB 3.0 2. You must connect the power adapter to the TU3-H4. 1. Turn on your computer and wait until startup completes. 2. Connect the included USB cable to the USB Hub, and then to your computer's USB port. 3. Connect the power adapter to the TU3-H4 and then into a power outlet. 4. Connect a USB device to an available USB port. Your Installation is now complete.
3. Verify Installation Windows 7/ Vista 1. Right-click Computer and click Properties. Then click Device Manager. 2. Expand “Universal Serial Bus controllers” and verify that the Generic USB Hub has been installed. Windows XP 1. Right-click My Computer and click Properties. Under the Hardware tab, click Device Manager. 2. Expand “Universal Serial Bus controllers” and verify that the Generic USB Hub has been installed.
Technical Specifications Hardware Standards USB 1.1, 2.0, 3.0 USB Ports Input: 1 x Type-B Output: 4 x Type-A LED Indicators USB Port 1-4 Data Rates Super speed: 5Gbps (USB 3.0) High speed: 480Mbps (USB 2.0) Full speed: 12Mbps (USB 1.1) Low speed: 1.5Mbps (USB 1.0) Power Supply Power adapter 5V DC, 2.5A Power Consumption 0.5 watts (max) Dimensions (LxWxH) 60 x 95 x 22mm (2.3 x 3.7 x 0.8in.) Weight 68g (2.
Troubleshooting 1. Can I connect or disconnect the USB cable while the computer is on? Yes, you can connect or disconnect the USB cable, or any external USB device while the computer is on because the USB interface is Plug-and-Play and hot-pluggable. 2. I have a USB 2.0/1.1 cable. Can it work with USB 3.0 devices? Yes, it works but it may cause problems for connecting SuperSpeed USB 3.0 external peripherals. Therefore, it is recommended that you use a certified USB 3.0 cable. 3.
Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase.
WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, THE CUSTOMER'S SOLE REMEDY SHALL BE, AT TRENDNET'S OPTION, REPAIR OR REPLACE. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Copyright ©2011. All Rights Reserved. TRENDnet.
