Installation guide

ManualsBrandsTrendnet ManualsHDD/SSD enclosuresTU3-S35

TU3-S35

1.01

Quick Installation Guide

Summary of content (10 pages)

PAGE 1
Quick Installation Guide TU3-S35 1.
PAGE 2
Table of Contents English 1. Before You Start 2. Hardware Installation 3. Accessing Storage Devices on TU3-S35 1 1 2 5 Troubleshooting 6 Version 04.28.
PAGE 3
1. Before You Start Package Contents TU3-S35 ? ? Multi-Language Quick Installation Guide ? CD-ROM (User’s Guide) ? USB 3.0 Type A to Type B Cable (1.8m/6ft) ? Power Cord ? Power Adapter (12V DC, 2A) ? Hard Drive Mounting Screws ? Mounting Stand System Requirements USB Port: 3.0, 2.0, 1.
PAGE 4
2. Hardware Installation 1. Unscrew and remove the device cover. 2. Connect the SATA data cable and power connector into the SATA hard drive. 3. Use the provided screws to secure the hard drive to the TU3-S35.
PAGE 5
4. Slide the cover back on and secure it with the 4 screws. 5. Connect the power adapter to the TU3-S35. 6. Insert the power cord into the AC Power Adapter and then to a power outlet. 7. Connect the Type B end of the provided USB cable into the TU3-S35.
PAGE 6
8. Connect the Type A end of the provided USB cable into an available USB port on your computer. 9. Move the power switch to the on position. 10. Drivers will install automatically. Note: It is recommended that you format a brand new hard drive first. Please refer to question 2 in the troubleshooting section for more information. Your Installation is complete.
PAGE 7
3. Accessing Storage Devices on TU3-S35 Note: For Windows 2000, ME, 98SE, and Mac OS X (10.4~10.6), please refer to the user guide on the User Guide CD-ROM. Windows 7/Vista/XP 1. Double-click on Computer or My Computer. A drive will be listed under Hard Disk Drives. Your storage device is ready for access For detailed information regarding the TU3-S35 configuration and advanced settings, please refer to the Troubleshooting section, User's Guide on the CD-ROM, or TRENDnet's website at http://www.trendnet.
PAGE 8
Troubleshooting 1. My computer does not recognize the TU3-S35. What should I do? 1. Verify that the computer meets the minimum requirements as listed in section 1. 2. Make sure the power adapter is properly connected. 3. Try plugging the device into a different USB port on your computer. 2. How do I format my brand new hard drive with the TU3-S35? 1. For Windows 7/Vista, right click on Computer and select Manage. When the Computer Management screen appears, click on Disk Management.
PAGE 9