Quick Installation Guide TV-IP100-N TV-IP100W-N H/W: 1.
Table ofofContents Table Contents English ...................................................................................................... 1. Before You Start ................................................................................. 2. Hardware Installation ......................................................................... 3. Configure the Internet Camera .......................................................... 1 1 3 4 Português Para Guia de Instalação em Português, favor ver CD.
1. Before You Start Package Contents TV-IP100-N/TV-IP100W-N ? Utility CD-ROM ? ? Quick Installation Guide ? 1 x 2dBi Detachable Antenna (TV-IP100W-N) ? AC Power Adapter (5V, 2.5A) ? Camera Mounting Stand System Requirements 10/100Mbps Ethernet ? ? Wireless router or wireless access point (TV-IP100W-N) CPU: 1GHz processor or above ? Memory: 256MB RAM or above/ 512MB RAM or above (Windows Vista) ? VGA Resolution: 800 x 600 or above ? Web Brower: Internet Exploreer (6.
Application Office Monitoring Front Gate Monitoring (TV-IP100-N) (TV-IP100-N) Wireless N Gigabit Router (TEW-633GR) Internet Parking Monitoring (TV-IP100W-N) Warehouse Monitoring (TV-IP100W-N) Cable/DSL Modem Parking Monitoring Warehouse Monitoring (TV-IP100W-N) (TV-IP100W-N) Wireless N Gigabit Router (TEW-633GR) Internet Office Monitoring (TV-IP100-N) Cable/DSL Modem 2 English Front Gate Monitoring (TV-IP100-N)
2. Hardware Installation 1. Connect a RJ-45 network cable from a Switch/Router to the Ethernet port of the Internet Camera Server. 2. Attach the Antenna. (TV-IP100W-N) 3. Connect the AC Power Adapter to the Internet Camera Server and then to a power outlet. 4. Verify the Power and Link LEDs are on.
3. Configure the Internet Camera Note: It is recommended that you configure the Internet Camera from a wired computer. Since the Internet Camera's default IP address is 192.168.10.30, make sure no other network devices are assigned an IP address of 192.168.10.30. For Windows Users 1. Insert the Utility CD-ROM into your CD-ROM drive and then click Setup Wizard. 2. Follow the Installation Wizard instructions and then click Finish. 3.
5. Enter the Admin ID and Password, and then click OK. By default: Admin ID: admin Password: admin If you like to change the Admin ID and password, click Change, enter the New ID and the New Password and confirm the New ID and New Password. Then click on the right arrow. 6. Click the right arrow. If you have the TV-IP100-N skip to step 9. If you have the TV-IP100W-N continue on to step 7. 7. Enter the Network Name (SSID) of your wireless network.
. If WEP is enabled on your wireless network, select the Encryption Mode (e.g. 64-bit, 128-bit), the Key Format (e.g. Hex, ASCII) and the Default Key (e.g. Key_1, Key_2, Key_3, Key_4). Then enter the encryption key in the Key1, Key2, Key3 or Key 4 field. Then click the right arrow. If WPA is enabled on your wireless network, enter the encryption key in the Pre-Shared Key field and then click the right arrow button to continue.
11. Verify the Power and Link LEDs are on. 12. In the Setup Wizard, click Link. 13. Click View Video | Active X or View Video | Java. 14. If you clicked on View Video | Active X, right click and select Active X Control. 15. Click Install. Your installation is now complete. Note: For detailed information regarding the TV-IP100-N/IP100W-N configuration and advanced settings, please refer to the Troubleshooting section, User's Guide on the Utility CD-ROM, or TRENDnet's website at http://www.trendnet.com.
Troubleshooting Q1:The setup wizard is unable to detect my camera. What should I do? A1: First, verify that you have followed all the steps in the Section 2: Hardware Installation. Second, disable any software firewall programs such as ZoneAlarm or Norton Internet Security. If you are using Windows XP or Windows Vista, disable the built in firewall. Third, click on Search in the setup wizard. Q2: The Image is blurry.
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation. Waste electrical and electronic products must not be disposed of with household waste. Please recycle where facilities exist. Check with you Local Authority or Retailer for recycling advice.
TRENDnet Technical Support US . Canada Toll Free Telephone: 1(866) 845-3673 24/7 Tech Support Europe (Germany . France . Italy . Spain . Switzerland . UK) Toll Free Telephone: +00800 60 76 76 67 English/Espanol - 24/7 Worldwide Telephone: +(31) (0) 20 504 05 35 English/Espanol - 24/7 Product Warranty Registration Please take a moment to register your product online. Go to TRENDnet’s website at http://www.trendnet.com/register 20675 Manhattan Place Torrance, CA 90501 USA Copyright ©2008.
