User's Guide

- 32 -
IP
By the default setting, your camera IP address is
assigned from your DHCP server. If you do not
have a DHCP server in your network, the IP
address will be assigned to 192.168.10.30.
Subnet Mask
Enter the Subnet Mask of the camera. The
default setting is 255.255.255.0.
Default Gateway
Enter the Default Gateway of the camera.
Primary/
Secondary DNS
DNS (Domain Name System) translates domain
names into IP addresses. Enter the Primary DNS
and Secondary DNS that are provided by ISP.
PPPoE: Select this option when you use a direct connection via the
ADSL modem. You should have a PPPoE account from your Internet
service provider. Enter the User Name and Password. The camera
will get an IP address from the ISP as starting up.
NOTE： Once the camera get an IP address from the ISP as starting up, it
automatically sends a notification email to you. Therefore, when
you select PPPoE as your connecting type, you have to set up the
email or DDNS configuration in advance.
 DDNS Setting
With the Dynamic DNS feature, you can assign a fixed host and
domain name to a dynamic Internet IP address. Please refer to
Chapter 6 for detail instruction.
 UPnP
The camera supports UPnP (Universal Plug and Play), which is a set of
computer network protocols that enable the device-to-device
interoperability. In addition, it supports port auto mapping function so
that you can access the camera if it is behind an NAT router or firewall.
Select the Enable option to enable this feature.
 Ports Number
HTTP Port: The default HTTP port is 80.