User's Guide

- 33 -
NOTE: If the camera is behind an NAT router of firewall, the port number
is suggested in the range between 1024 to 65535.
 HTTPS
Enable: Select this option to enable HTTPS, which is a secure
protocol to provide authenticated and encrypted communication
within your network.
HTTPS Port: Assign a HTTPS port in the text box. The default
HTTPS port is 443.
Network >> IP Filter
The IP Filter setting allows the administrator of the camera to limit the
users within a certain range of IP addresses to access the camera.
 Start/End IP Address
Assign a range of IP addresses that are not allowed to access the
camera by entering the Start IP address and End IP address. When you
are finished, click Add to save the range setting. You can repeat the
action to assign multiple ranges for the camera.
For example, when you enter 192.168.10.50 in Start IP Address and
192.168.10.80 in End IP Address, the user whose IP address located
within 192.168.10.50 ~ 192.168.10.80 will not be allowed to access
the camera.