User's Guide

- 6 -
Power LED: A steady orange light indicates the camera is powered
on.
Link LED: A flash green light indicates the camera’s network
connection correctly.
Lens: Adjust the focus by rotate outside of the Lens.
WPS button: A quick connection button to your encrypted
wireless network
Detachable Antenna:
Adjust the antenna position to get the maximum signal.
Camera Stand Connector: Connects the camera with the camera
stand.
Power Connector: Connects the power adapter in order to supply
the power to the camera.
LAN Port: Connects one end of the Network cable to LAN port and
connect the other end cable to your network
Reset Button: Press the reset button once to reset the current
setting. Press the reset button continuously for 5 seconds to
restore the camera to factory default setting.