1. Before You Start Package Contents *TV-IP1918P1/ TV-IP1319P1 «Tory Security Allan Key (TVAP1319P1 only) *Quick Installation Guide =Weather Seal Minimum Requirements «Rolando or 105 device *Working onetime service and WI-Fi = Existing PoE network +Network cable Free Mobile App: Trend net Mira Requirements. Supported Operating Systems Android (version 4.4 or above) 105 {version 8.2 or above} Note: Scan the OR code with your mobile device to install the App.
Using a PoE switch % Mote: = Connect the TV-IP1318PI / TV-IP1319P1 to your network using an existing compliant PoE switch of Infect or. «For outdoor installation, please configure weather seal {induced) per the diagram below, you will have to terminate the JR-45 connector after the ‘weather seal has been applied.
2, Hardware Installation and Configuration 1. Do not Install or mount the IP camera until after you complete the installation steps below. Temporarily place the IP camera near you and connected to & network. 2. Download and Install the Trend Mira app on your molls device, then open the app. Note: Please connect your mobile device to the WI-A of the same network of which the camera will be connected to. 3. Once you open the app, It will ask you to Select Country or Revlon.
4. Once you pan the app, click the Logan button. Note: It you do not have an account please takes the spats necessary o create one.
. After clicking Abdul Device, you will then have to scan the QR Code on the label of the camera with your moils device.
. Adding has ban complicated, Press Next. g Compliment 11. Edit Alas of your camera and press Save. After this tape you will bs. taken to the live view of your camera.
Mounting the camera % 1. Pace the provided template label on the wall or selling. For TV-IP131871 For TV-IP1319P1 2. Dell holes at sate marked position on the template. Make sure the drill bit matches the size of the holes on the templates. 3. (Dome) Remove the dome cover using the provided Tory security Allen key.
4. Ingot the screw anchors Info the holes, and align the mounting base ‘over them. Then uas the provided screws to secure the camera to the mounting surface.
‘When finished, attach the mods cover back on the dome using the ; 4B. {Dome) Manually adjust your camera fo the desired viewing position. z Tory security Allen key.