Preface This user’s guide is written to demonstrate the TV-IP320PI camera installation and operation with firmware version 5.3.4 and above. Please download and upgrade the camera firmware to the latest version by visiting www.TRENDnet.com and then search of TV-IP320PI. User’s Guide version: 1.
TRENDnet User’s Guide Table of Contents TV-IP320PI Table of Contents...................................................................................... 3 Front View ...................................................................................................................... 7 Rear View ........................................................................................................................ 7 Connectors ...........................................................................
TRENDnet User’s Guide Log ................................................................................................................................... 28 Search for logs........................................................................................................ 28 System Information .................................................................................................. 29 System Configuration...........................................................................
TRENDnet User’s Guide TV-IP320PI Product Overview Hardware Adjustable Bracket Fully adjustable integrated mounting bracket provides installation flexibility PoE Save installation costs with Power over Ethernet (IEEE 802.3af) Outdoor Ready Outdoor IP66 weather rated and an operating temperature range of -30 – 60 °C (-22 – 140 °F) Performance 1.3 Megapixel TV-IP320PI Record 1280 x 960 pixel video at 30 fps in H.264 compression Night Vision Night vision up to 30 meters (100 ft.
TRENDnet User’s Guide TV-IP320PI Camera Management Complimentary Software Multi-Language Interface Complimentary pro-grade software to manage up to TRENDnet 32 cameras Support for English, French, Spanish, German, and Russian Advanced Playback Advanced in-camera archived video review functionality Dynamic DNS Support Support for dyn.com and NO-IP.
TRENDnet User’s Guide TV-IP320PI Front View Rear View Sun Shield Sun Shield Grounding Screw Lock Ring Reset Button Mounting Base Ambient Light Sensor IR LEDs Connectors Sun Shield Reset Button Grounding Screw Lock Ring Protect camera lens from direct exposure to the Sun. Push and hold the reset button then power on the camera. Keep holding the reset button for more than 10 seconds to reset configuration to factory default. Connects to electric ground. Loosen to adjust the camera position.
TRENDnet User’s Guide TV-IP320PI Warnings Cautions Serious injury or death may be caused if any of these warnings are neglected. Follow these safety guards to prevent serious injury or death. Injury or equipment damage may be caused if any of these cautions are neglected. Follow these precautions to prevent potential injury or material damage.
TRENDnet User’s Guide Installation Procedure There are number of factors involved in a successful camera installation. Follow the suggested installation steps and go through the check lists. This guide will help you make your camera installation smoothly and easily.
TRENDnet User’s Guide Setup Your Camera with CD 1. Insert the Installation CD-ROM into your computer’s CD-ROM drive to initiate the Auto-Run program. Choose your preferred language and then click the Install Camera. 2. Write down the MAC Address of the camera. © Copyright 2015 TRENDnet. All Rights Reserved. TV-IP320PI 3. Connect a PoE capable network cable to the camera’s network port and then to a PoE switch and wait for the camera to boot up. Click Next when you are done.
TRENDnet User’s Guide 5. The installation wizard will list cameras found on your network. If only one camera is found, it will be selected by default. If you have more than one camera on the network, please choose the camera you wish to set up by identifying its MAC address. Select the camera and then click Next. TV-IP320PI 7. If you select Fixed IP, enter the IP address, subnet mask, default gateway, and DNS server address.
TRENDnet User’s Guide TV-IP320PI 8. Enter a new password. The default password is admin. You are required to change the password from the default setting to prevent unauthorized access. Enter the default password: admin and enter the new passwords for a brand new installation. The password must be between 8 and 16 characters. (Alphanumeric: a-z, A-Z, 0-9, !, @, #, $) Note: This camera installation wizard is also good for finding the camera if it was setup with DHCP.
TRENDnet User’s Guide 10. Click here to access to the camera’s web page or click Next for mobile app installation. TV-IP320PI 11. Click Finish to exit the program or click Home to return to the main screen. You can also download a free app to view video on your mobile devices. Scan the QR code to find and install the TRENDnetVIEW app. Free App Night Vision © Copyright 2015 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TV-IP320PI Hardware Installation Mount your camera Cabling Drill the screw holes and the cable hole if necessary with the drill template comes with the package. It’s recommended that the wiring the cable in your home or office by a professional. If you already have the cable deployed, make sure the cable and the connectors meet the category 5 Ethernet cable standards. At least 2 pairs of twisted lines are required for power and data.
TRENDnet User’s Guide Fix the mounting base on the ceiling or the wall with the screws that come with the package. Route the cables to the cable hole. © Copyright 2015 TRENDnet. All Rights Reserved. TV-IP320PI Loosen the lock ring and then adjust the camera position. Tighten the lock ring when you setup the camera position.
TRENDnet User’s Guide TV-IP320PI Access your Camera with the Web Browser System Management and Default Settings It is recommended that you install your camera with the CD that comes with the package and use accompanying TRENDnetVIEW Pro software (version 2.4.3 or later) for Windows computers. The software is included on the CD comes with the package. If you do not have the CD with you, you can go to http://www.TRENDnet.com/support enter the model number “TV-IP320PI” and download the software.
TRENDnet User’s Guide 3. The camera management page will detect if you installed the camera video streaming plug-in or not. Click the link to download the plug-in from the TV-IP320PI camera. TV-IP320PI 5. Permission request may show up depends on the Internet security settings on your computer. Click More Info and then Run anyway to install the plug- in. 6. Click Next to install the plug-in. 4. Download the plug-in to your computer and then and close your browser.
TRENDnet User’s Guide TV-IP320PI 11. The Live View page will show up and begin streaming video. 8. Open the browser and login again. 9. (Go to step 11 if you already changed your password with the setup CD). The TV-IP320PI will ask you to change your password from default setting. Please enter the new password twice and click OK. The password must be between 8 and 16 characters. (Alphanumeric: a-z, A-Z, 0-9, !, @, #, $). 10. Enter the user name admin and new password again to start secured session.
TRENDnet User’s Guide Logging-in to the Camera for the First Time (OS X) 1. Open the web browser on your computer. In the address bar, enter the IP address of the camera 192.168.10.30. (If you have a DHCP server on your network, the IP address will be assigned dynamically. For example, if you have a home gateway on your network and you plug-in the camera on the same network, then you can find the camera IP address on your home gateway), and then press Enter. TV-IP320PI 3.
TRENDnet User’s Guide TV-IP320PI 4. Quit your browser completely by command-Click on the browser icon and then click Quit before installing the plug-in. 6. Click Open to start installation. 5. Go to the Finder and navigate to the Download folder. CommandClick the WebComponents.pkg and then click Open. (If you are install the plug-in from the CD, just browse to /Mac folder and double click the WebComponents.pkg file.) 7. Click Continue to install the plug-in. © Copyright 2015 TRENDnet.
TRENDnet User’s Guide TV-IP320PI 8. Select a destination to install the plug-in. Then click Continue. 10. Enter your password and click Install Software 9. Use the default location and click Install. 11. Installation will process automatically. © Copyright 2015 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide 12. Click Close to exit the installation. 13. Open the browser and login again with the default IP 192.168.10.30 or the IP that was dynamically assigned by your router. © Copyright 2015 TRENDnet. All Rights Reserved. TV-IP320PI 14. Enter the user name, admin, and the default password, admin, and then click OK. 15. Click Trust (You’ll have to do this again when your camera changes to a new IP address.
TRENDnet User’s Guide 16. The TV-IP320PI will ask you to change your password from the default setting. Please enter the new password twice and click OK. The password must be between 8 and 16 characters. (Alphanumeric: a-z, A-Z, 0-9, !, @, #, $). TV-IP320PI 18. The Live View page shows up and the video starts to stream. 17. Enter the user name admin and new password again to start secured session. © Copyright 2015 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TV-IP320PI Live View After you log-in into the camera management page, you’ll see the Live View page. Multi-Language Change your preferred language anytime. Snapshot Click this icon to take a video snapshot. Zoom Click once to enable zoom. When enabled, click and drag the area on the picture to zoom in. Right click to resume 100% zoom. Click the icon again to disable zoom. The zoom function works in full screen mode as well. Recording Click once to start recording.
TRENDnet User’s Guide Playback You can playback the video recording on the network storage and download the video clip and snapshots to your local computer. (See Network Storage on page 54 to setup the storage.) TV-IP320PI Time Line There is a play back head in the center of the time line represented in a yellow vertical line. To look for a specific video recording, move the time line by clicking and dragging it. If the recording is short, zoom in by clicking button. Click to zoom out the time scale.
TRENDnet User’s Guide TV-IP320PI Playback Slice images from video playback Use playback controls to play back the video recording. You can take snapshots from playback video or make new video clips from the video you are playing back. Click this button to play the video. Click this button to pause video playback. Click this button to stop playback. Click this button increase playback speed*. Click this button decrease playback speed*. Click to playback video frame by frame.
TRENDnet User’s Guide Download sections of video TV-IP320PI Download snapshots To save complete video sections or snapshots, you can download the files directly. Click Click button to list snapshots to download button to download video sections. Check the time of the recording, select the videos you want to download, and then click Download. Select the type of event that triggered the snapshots. Choose the Start Time and End Time. Then, click Search to find the snapshot list.
TRENDnet User’s Guide Log The log of the TV-IP320PI will be saved on the network storage. You can search the relevant records and save to your local computer. (See Network Storage on page 54 to setup the storage.) TV-IP320PI Search for logs Click the type of log and then the Start Time and End Time. Click Search to start searching. Click First Page, Prev Page, Next Page, and Last Page to show the logs. Click Save Log to save the logs to your computer.
TRENDnet User’s Guide TV-IP320PI System Information System Information page shows the TV-IP320PI’s basic information. Click System then click System Info to show the page. Basic Information Device Name: Human readable device name for easy identification. Firmware Firmware version Version: MAC Address: The MAC address of Ethernet Interface System Time: The system time setup in the camera. Keeping this time correct is important for recording, scheduled control and logging accurately.
TRENDnet User’s Guide TV-IP320PI System Configuration Device Settings Setup your camera name and location for easy identification. This camera name will also be recognized by other network camera software as the name of this camera. OSD, On Screen Display, camera name is referring to this setting as well. Names Camera Name: Name of the camera. The camera name setup here can be discovered by other network camera software and OSD, On Screen Display.
TRENDnet User’s Guide TV-IP320PI User Accounts Time Settings You can setup up to 16 user accounts to access the camera’s video stream with a web browser or real time video stream (RTSP). Only one administrator account can be setup to configure the TV-IP320PI and cannot be deleted. The accuracy of the system clock is important for scheduling and accurate logging. You can synchronize the system time with your computer, or automatically check the time accuracy with a network time server (NTP server).
TRENDnet User’s Guide TV-IP320PI Daylight Savings Setup daylight savings. Manual Time Sync Device The system time of this camera. Time: Set Time: Click the calendar icon and manually select the date. Check the Sync. with computer time to copy the time from your computer. Click Save to save the changes © Copyright 2015 TRENDnet. All Rights Reserved. Automatic Update Enable DST: Check this box if your time zone has daylight savings.
TRENDnet User’s Guide Live View Settings Setup the live view video quality, file size and file saving directories. Live View Parameters Live View Configure the buffer size for live view video stream. Buffer: With low buffer size setting, you can get real-time video stream, but the video may be stop and go if the network is congested. With high buffer setting, you can have smooth video streaming, but the video is delayed from the time happening.
TRENDnet User’s Guide Maintenance You can restart, load camera settings and upgrade the camera firmware on this page. TV-IP320PI Import Config. File Config File: To load previously saved settings, click Browse to find the configuration file and then click Import. Status: Shows the status in loading configuration file. Export Config. File Export: Click Export to download configuration file. The file will be downloaded to the Download folder by default.
TRENDnet User’s Guide TV-IP320PI Network Settings Network Interface MAC Address: The MAC address of the camera. TCP/IP Duplex and Choose one of the Ethernet duplex and speed to Speed: match your network. Default: auto. MTU: Maximum transmission unit. The maximum field size in the Ethernet packet. Primary DNS: Enter your first IPv4 or IPv6 DNS server address Secondary DNS: Enter your second IPv4 or IPv6 DNS server address Setup your basic IPv4 and IPv6 network settings on this page.
TRENDnet User’s Guide TV-IP320PI Port DDNS You can change the service port numbers of TV-IP320PI and enable/disable RTSP or HTTPS services. Dynamic Domain Name Service, DDNS, allows you to find your camera from the Internet with an easy to remember domain name. Port Numbers HTTP Port: The default web access port. You can change the port number. However, you cannot disable the web service. The default port number is 80. RTSP Port: The Real-Time Streaming Protocol port for video streaming.
TRENDnet User’s Guide TV-IP320PI PPPoE SNMP Setup PPPoE (ADSL) connection to connect your camera with your ISP, Internet Service Provider. SNMP Settings allows you to assign the contact details, location, and community name and trap settings of SNMP. This is a networking management protocol used to monitor network-attached devices. SNMP allows messages (called protocol data units) to be sent to various parts of a network.
TRENDnet User’s Guide SNMP V1/V2 Enable SNMPv1: Enable SNMPv2c: Read SNMP Community: Write SNMP Community: Trap Address: Check this box to enable SNMP v1 management. Write User SNMP v3 manager user name. Name: Security Level: Choose one of the security levels. Check this box to enable SNMP v2c management. Specify the password to access the SNMP community for read only access. Specify the password for access to the SNMP community with read/write access. Specify the IP address for the SNMP trap community.
TRENDnet User’s Guide TV-IP320PI 802.1X IP Address Filter Setup 802.1X for remote authentication service. Set up a list of clients allow only the clients on the list to access this camera or to reject clients on the list from access this camera. 802.1X Authentication Enable IEEE Check this box to enable 802.1X authentication 802.1X: service. EAPOL version: Extensible Authentication Protocol (EAP) over LAN (EAPoL). Choose version 1 or 2. This version number has to match to your 802.
TRENDnet User’s Guide TV-IP320PI Quality of Service (QoS) UPnP Setup traffic prioritization tags the video packets to go through network switches and routers with assigned priority. You can set the Differentiated Services Code Point (DSCP) bits on outgoing data streams. The QoS capable network device will forward different data in different priorities. The meaning of the value is different in different DiffServ domains. Consult your network manager for the setup details.
TRENDnet User’s Guide Video Settings TV-IP320PI Resolution: Main Stream Sub Stream Video Format Adjust the format of video. Bitrate Type: Choose between variable bit rate or constant bit rate for video compression. The default is variable rate. Video Quality: Choose the video (compression) quality. The default is medium quality. Frame Rate: Choose the capturing frame rate. The default value is 30 frames per second. Reduce the frame rate to reduce the capture file size. Max.
TRENDnet User’s Guide TV-IP320PI Display Settings Adjust video image quality, lightness, and color settings here. Brightness: Use the slider or enter a number (0-100) to adjust the image brightness. Default: 50 Contrast: Use the slider or enter a number (0-100) to adjust the image contrast. Default: 50 Saturation: Use the slider or enter a number (0-100) to adjust the color saturation. The greater number means the color will be more saturated.
TRENDnet User’s Guide TV-IP320PI Light sensitivities Smart IR: Smart IR can adjust the strength of infrared lights at night depending on the distance of an object to maintain the maximum IR light distance and while maintaining a clear picture when object is close by. Default: On. Max. Exposure Adjust this value for exposure time for Time: each picture. You can choose a value between 1/3 second to 1/100,000 second. The default value is 1/30 second exposure time for each picture.
TRENDnet User’s Guide Image adjustments Back Light Compensation and Digital WideDynamic-Range: Back light compensation: Setup a fixed light source position to compensate and adjust the image in the dark. Choose the area that you want to enhance (dark area, not light source). TV-IP320PI On Screen Display Settings Display the camera name and the time the video is shooting on the screen Note: By default, the D-WDR is enabled. Please disable DWDR to set up back light compensation.
TRENDnet User’s Guide TV-IP320PI Text Overlay Privacy Mask Display extra information on the screen over the image. Create a masking area to keep your privacy. You can create up to four independent masking areas by clicking and dragging on the screen. Check Box: Check this box to enable text overlay. Text Field: Enter the text you want to display. You can enter your local language if you want. The text field allows maximum 44 English letters or 20 nonEnglish characters.
TRENDnet User’s Guide TV-IP320PI Video Recording Edit: Click Edit to edit the recording schedule. The Edit Schedule window will pop up. Pre-record: Recording time before trigger event. Post-record: Recording time after trigger event. Overwrite: Select Yes to allow older recordings to be overwritten. Enable Check this box and then click Save to enable Record video recording. Schedule: Click Save to save the changes © Copyright 2015 TRENDnet. All Rights Reserved. 1.
TRENDnet User’s Guide TV-IP320PI Events Motion Detection Set up how the motion detection event will be triggered and what actions will be triggered. © Copyright 2015 TRENDnet. All Rights Reserved. Enable Motion Detectio n: Enable Motion Tracking : Check this box to enable motion detection. Click Save to save the choice. Check this box to enable motion tracking. Motion tracking is a dynamic display that shows the current status of motion detection. The motion tracking is displayed with grids in green.
TRENDnet User’s Guide Draw Click Draw Area button to start drawing. Click and Area: drag on the area you want to set up the motion detection. You can draw up to 8 different areas. Click Stop Drawing to stop drawing motion detection areas. The red grids represent the motion detection area. Sensitivit Move the slider to adjust detection sensitivity. y: Clear All: Click this button to clear all the set up areas. © Copyright 2015 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide Notification Send Email: Check this box to send an e-mail notification when motion is detected. Network Check this box to record video to network storage Storage: when motion is detected. Upload to FTP: Check this box to send snapshots to an FTP server when motion is detected. TV-IP320PI Video Tampering This is to detect if the camera has been tampered with and surveillance is compromised. You can set up tamper proof notifications to alert the system manager to check the camera.
TRENDnet User’s Guide Enable Check this box to enable tamper detection. Click Tamper Save to save the settings. Detection: Draw Area: Click Draw Area button to start drawing. Click and drag on the area you want to set up the tamper detection. You can setup only one area for tamper detection. Click Stop Drawing to stop drawing motion detection areas. The gray block represents the detection area. Sensitivity: Move the slider to adjust detection sensitivity.
TRENDnet User’s Guide TV-IP320PI Exception Provide notifications for other system events, set up your notifications here. Notification Exception First, choose the exception type, and then choose Type: the corresponding action. Send Email: Check this box to send an e-mail notification when motion is detected. Click Save to save the changes © Copyright 2015 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TV-IP320PI Snapshot You can set up your camera to continuously taking snapshots or taking snapshots only when events happening. Event triggered Enable: Check this box to take snapshots when an event is occurred. Format: Save snapshots in JPEG format Resolution: Uses the same resolution set in Video Format for the snapshot resolution. Quality: Choose a compression quality for snapshot. Interval: State the time interval between this series of snapshots.
TRENDnet User’s Guide Email Set up email accounts for notifications. TV-IP320PI SMTP Server: Simple Mail Transportation Protocol Server address, the outgoing email server address. It may has address the same as your incoming email server, maybe not. Please ask your email service provider for detail. SMTP Port: Service port number for outgoing email.* Enable Check this box if your service provider requires a SSL/TLS: SSL or TLS secured connection.
TRENDnet User’s Guide TV-IP320PI Network Storage Network Storage Network Storage must be setup before it can be managed. For storage management, please refer to the next section. The TV-IP320PI supports two formats of network storage file systems: NFS and CIFS. NFS, Network File System, is natively supported by Linux computers and most NAS, Network Attached Storage. CIFS, Common Internet File System, is natively supported by Windows® systems and now is generally supported by Linux.
TRENDnet User’s Guide TV-IP320PI Storage Management Network Storage must be setup before it can be managed. To setup storage, please refer to the previous section. Format: Select a network storage volume and then click Format to format your network storage. This action will format the network volume (shared folder) for video recording. Placeholder files (formatting files) will be created to make sure disk allocation is appropriate and the file searching is optimized.
TRENDnet User’s Guide TV-IP320PI FTP Server Enable Snapshot to FTP: Server Address: Port: User Name/Anonymo us: Password: Confirm: Check this box if you want to store snapshots on the FTP. Enter the FTP server IP address. Enter the service port number of the FTP server. Check Anonymous if the FTP server does not require authentication. Enter the User Name if the FTP server requires authentication. Enter the password of the FTP account.
TRENDnet User’s Guide Appendix TV-IP320PI To change the setting, browse to your camera, then right click on the camera name. Click Camera Setup Wizard … to invoke the setup window. Direct video access - RTSP To access the video directly through RTSP, just visit the camera IP address on port 554 by default. For example: 192.168.10.30:554 use the admin or user password the login.
TRENDnet User’s Guide Select the camera and then click Next. TV-IP320PI Select Video Input tab. And then choose RTSP (RFC 2326) mainstream video. Click RTSP tab if you want to check or change the default RTSP settings. Click Property to setup the camera property. © Copyright 2015 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide Click Next or make your changes through the wizard. TV-IP320PI Find Bonjour device quickly with Safari The TV-IP320PI is Bonjour enabled device. You can easily find your camera with Bonjour service if you have a Mac. You can find Bonjour in your Favorites bar. If you don’t see it, click Safari >> Preference. In Advanced tab, check on Include Bonjour in the Favorites bar. © Copyright 2015 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TV-IP320PI Regulations Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
TRENDnet User’s Guide TV-IP320PI Europe – EU Declaration of Conformity Français [French] This device complies with the essential requirements of the Directive 2004/108/EC and 2006/95/EC.
TRENDnet User’s Guide Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase. • TV-IP320PI – 3 Years Warranty If a product does not operate as warranted during the applicable warranty period, TRENDnet shall reserve the right, at its expense, to repair or replace the defective product or part and deliver an equivalent product or part to the customer.
