User's Guide
Table Of Contents
- Preface
- Table of Contents
- Product Overview
- Installation Procedure
- Plan for installation location
- Setup Your Camera with CD
- Hardware Installation
- Access your Camera with the Web Browser
- System Configuration
- Network Settings
- Video Settings
- Events
- Network Storage
- Appendix
- Regulations
- Limited Warranty
TRENDnet User’s Guide TV-IP320PI
© Copyright 2015 TRENDnet. All Rights Reserved. 10
Setup Your Camera with CD
1. Insert the Installation CD-ROM into your computer’s CD-ROM drive to
initiate the Auto-Run program. Choose your preferred language and
then click the Install Camera.
2. Write down the MAC Address of the camera.
3. Connect a PoE capable network cable to the camera’s network port
and then to a PoE switch and wait for the camera to boot up. Click Next
when you are done.
* A power adapter (sold separately) can be used instead of PoE switch.
4. Wait while the utility is searches for the camera.