User's Guide
Table Of Contents
- Preface
- Table of Contents
- Product Overview
- Installation Procedure
- Plan for installation location
- Setup Your Camera with CD
- Hardware Installation
- Access your Camera with the Web Browser
- System Configuration
- Network Settings
- Video Settings
- Events
- Network Storage
- Appendix
- Regulations
- Limited Warranty
TRENDnet User’s Guide TV-IP320PI
© Copyright 2015 TRENDnet. All Rights Reserved. 37
PPPoE
Setup PPPoE (ADSL) connection to connect your camera with your ISP,
Internet Service Provider.
PPPoE (ADSL)
Enable PPPoE:
Check this box to enable PPPoE connection.
Dynamic IP:
The IP address assigned by ISP
User Name:
Enter the account name.
Password:
Enter the password.
Confirm:
Enter the password again.
Click Save to save the changes
SNMP
SNMP Settings allows you to assign the contact details, location, and
community name and trap settings of SNMP. This is a networking
management protocol used to monitor network-attached devices. SNMP
allows messages (called protocol data units) to be sent to various parts of
a network. Upon receiving these messages, SNMP compatible devices
(called agents) return data stored in their Management Information Bases.