User Guide

TRENDnetUser’sGuide TV‐IP420P
©Copyright2016TRENDnet.AllRightsReserved. 19
LiveView



Snapshot
Clickthisicontotakeavideosnapshot.
Afteryoulog‐inintothecameramanagementpage,you’llseetheLiveViewpage.

Zoom
Click once to enable zoom. When
enabled,clickanddragtheareaonthe
picture to zoom in. Right click to
resume 100% zoom. Click the icon
again to disable zoom. The zoom
functionworks
infullscreenmodeas
well.


Recording
Click once to start recording. Click it
againtostoprecording.Thestatusbar
willindicateifitisinrecordingstateor
not.

VideoStream
TV‐IP420P has two video streams:
H.264andMJPEG.Switchtoviewthe
differentvideostreamsbyclickingthis
icon.
FullScreenMode
Clickthepicturetoviewinfullscreen
mode. Double click again or press
escapekeyonyourkeyboardtoexit
fullscreenmode.
StatusBar
Thestatusbarshowsthestatusyou
are at, including enabled the zoom,
recording video, and successfully
takingasnapshot.