User Guide

TRENDnetUser’sGuide TV‐IP420P
©Copyright2016TRENDnet.AllRightsReserved. 26
SystemConfiguration
DeviceSettings
Setupyour cameranameand location foreasyidentification.This camera
namewillalsoberecognizedbyothernetworkcamerasoftwareasthename
of this camera. OSD, On Screen Display, camera name is referring to this
settingaswell.

Names
CameraName:
Nameofthecamera. Thecameranamesetup
herecanbediscoveredbyothernetworkcamera
softwareandOSD,OnScreenDisplay.Thedefault
cameranameisthemodelnumber:TV‐IP420P
Location: Labelwhereyouinstalledthiscameraforreference

Authentication
RTSP: TV‐IP420P’svideostreamcanbeaccessedwith
RTSP,RealTimeStreamingProtocol.Onlythe
administratoranduserscanviewthisvideostream
Un‐checkingthisboxwillalloweveryoneaccesstothisvideo
streamwithoutauthentication.Default:Checked.

Service
Enable
Telnet:
TV‐IP420PembeddedTelnetserviceformultiplecamera
controlforsystemdeveloper.Default:disabled.
