User Guide

TRENDnetUser’sGuide TV‐IP420P
©Copyright2016TRENDnet.AllRightsReserved. 31
NetworkInterface
MACAddress: Clickthisbuttontorebootthiscamera.
Duplexand
Speed:
Choose one of the Ethernet duplex and speed to
matchyournetwork.Default:auto.
MTU:
Maximumtransmissionunit.Themaximumfieldsize
intheEthernetpacket.
PrimaryDNS: EnteryourfirstIPv4orIPv6DNSserveraddress
SecondaryDNS: EnteryoursecondIPv4orIPv6DNSserveraddress

IPv4
DHCP: CheckthisboxiftheIPaddressisassignedbyDHCP
server.
IPv4Address: TheIPv4dynamicorstaticaddress
SubnetMask: Networkrangeofthesubnet
DefaultGateway: ThedefaultroutegoingfurtherfromTV‐IP420PIPv4
subnet

IPv6
IPv6Mode: ChooseManual,DHCP,orRouteAdvertisement.Click
View Route Advertisement to find a route
advertisement.
IPv6Address: IPv6addressofTV‐IP420P
PrefixLength: Lengthofnetworkprefix
Default
Gateway:
ThedefaultroutegoingfurtherfromTV‐IP420PIPv6
subnet


Port
YoucanchangetheserviceportnumbersofTV‐IP420Pandenable/disable
RTSPorHTTPSservices.

PortNumbers
HTTPPort: Thedefaultwebaccessport.Youcanchangetheport
number. However, you cannot disable the web
service.Thedefaultportnumberis80.
RTSPPort: The Real‐Time Streaming Protocol port for video
streaming. You can change the port number or
disabletheservicebyuncheckthebox.Thedefault
portnumberis554.
HTTPSPort: Thesecured webservice port. Youcanchange the
port number, or you can disable the service by
uncheckthebox.Thedefaultportnumberis443.
ClickSavetosavethechanges



